Swann SW242-LPN, DVR4-1100 manual Stop Recording, Recording Time on Hard Drive

User’s Manual

2.Recording symbol (channel is currently recording)

3.Channel Name

4.Record Resolution (QUAD or EACH)

5.Status (REC, Play, FF1, FF2, FF3, REW, PAUSE)

6.HDD Info. ([M] Master Hard disk)

7.Record Schedule: (T) Continuous (M) Motion Detection (-) No Recording

8.The date and time on the DVR

6.2Stop Recording

Press [Stop] button to stop recording. If you have already activated the

password protection, you need to input the password.

6.3 Recording Time on Hard Drive

Estimated record time based on a 120GB Hard Drive (Quad Mode) in hours:

System	Quality	Frame Rate	30	15	7	1
	HIGH	20 K Bytes	58	117	251	1748
NTSC
	NORMAL	15 K Bytes	78	155	332	2330
	LOW	12 K Bytes	97	194	416	2913

System	Quality	Frame Rate	25	12	6	1
	HIGH	20 K Bytes	70	146	291	1748
PAL
	NORMAL	15 K Bytes	93	194	388	2330
	LOW	12 K Bytes	117	243	485	2913

You can calculate and estimate record hours by below formula:

120 (G Byte) × 1024 (M Byte) × 1024 (K Byte)

Divided by:

15 (Kbyte/frame) × 7 (frame/sec.) × 60 (sec.) x 60 (min.)

Estimated time would be 332 Hours.

- 13 -