User’s Manual
Chapter 3: Installation
3.1Installing Hard Drive
1.Unplug the power supply. Don’t install or uninstall HDD when DVR is on!!
2.Slide the HDD tray out of DVR body carefully.
3.Connect the power cord and data cable to hard disk drive.
Make sure the HDD is set to be MASTER according to the hard drive manual.
The 4 pin connection is the DC power cable for HDD, and the wider cable is the standard
hard drive IDE type connection.
4.Insert the HDD tray into DVR body tightly.
5.Lock the HDD tray.
Lock the caddy by turning the key clockwise.
If you need to unlock the tray, turn the key
CAUTION:
1.If you do NOT lock the HDD tray, the DVR system might not function properly.
2.Do not remove the HDD tray while the DVR is on!
3.2 Connecting Camera and Monitor
There are 4 camera inputs and 1 video output with BNC connectors (Refer to
2.2 Rear Panel).
3.3 Connecting Power Supply
Please only use the power adapter supplied with the DVR. The standard power supplied to the DVR is DC 12 Voltage, 3 Amperes.
- 3 -