User’s Manual
MAIN MENU |
|
CAMERA SELECT | 1 2 3 4 |
RECORD SELECT | 1 2 3 4 |
RESOLUTION | EACH |
RECORD FRAME | 25 |
RECORD QUALITY | HIGH |
SCHEDULE SET |
|
MISCELLANEOUS MENU |
|
HARD DISK SET |
|
MOTION SET | PAL |
VIDEO MODE | |
FACTORY RESET |
|
PRESS (UP，DOWN), ENTER (SELECT)
PRESS (MENU) TO EXIT
5.2 Camera Select
[
Menu]: enter system menu
[
Up] and [ Down]: move the cursor
[
SEL]: select/modify settings
[
Menu]: press again to exit
The DVR system can display 4 cameras feed in one picture (Quad Mode).
You can configure which camera is displayed.
Press [
SEL] to modify setting, or press [CH1], [CH2], [CH3] and [CH4] to set each channel separately.
If a channel is disabled, the system will display “OFF” on the monitor, meanwhile, this channel won’t be selected to record. (Refer to 5.3 Record Select)
5.3 Record Select
Configure which channel is allowed to record.
Note: If no channels are selected, an error message will appear briefly on the screen when record is selected.
- 6 -