D9 Viewer Software (continued)
Record
In the RECORD screen in SETUP you can change the camera record settings. You can turn each channel on or off, select the recording resolution & quality, turn on or off the audio, select a record mode and set up the record schedule.
Most of the options that you will find here operate in exactly the same manner as on your DVR. However, note that, as this software can be used to control a few different models of DVR, that occasionally an option will be displayed which has no effect on your DVR. Don’t worry about these settings - they won’t interfere with the operation of your DVR.
2. Resolution & Quality
Scroll over & LEFT click to highlight a button to set the QUALITY;
BEST, FINE or NORMAL.
3. Audio
i. Scroll over the dropdown list and LEFT click.
ii. Select ON to switch audio (for all channels). Selecting OFF will turn audio off.
4. Record Mode
i. Scroll over the dropdown list and LEFT click.
ii. Select ON to switch recording on for that channel. Selecting OFF will turn recording OFF.
5. Schedule |
|
i. Scroll over the | button and LEFT click. |
ii.You will see a new schedule open. It will include 24 columns from
iii.Scroll over the button and LEFT click.
iv.Scroll over & LEFT click the channel you want to set the schedule for in
the dropdown list.
v. Scroll over & LEFT click a record mode.
vi.Scroll over & LEFT click the boxes to set the hours to the record mode you chose.
RED = ALARM
GREEN = NORMAL
WHITE = NO RECORD
vii.Scroll over then LEFT click (beside the COPY).
viii.You will see a dropdown list with SUN, MON, TUE, WED, THU, FRI & SAT.
ix.Scroll over the day you want to copy the schedule FROM.
x.LEFT click.
xi.Scroll over then LEFT click (beside the SET TO).
xii.This time the dropdown list will include an ALL option includ- ing all the days of the week listed above. Scroll over the day you want to copy the schedule TO. Selecting ALL will copy the schedule to all the other days of the week.
xiii.LEFT click.
xv.After you have chosen the day you want to copy from and the
day you want to copy to, scroll over & click thebutton.
34