Setup Menu
The Setup menu includes many setting the user can select to customize the use of the QD- MultiDrive duplicator. Here is a description of the options in the setup menu.
Language
The
CD Burn Speed
The default record speed for the
NOTE: 12x is currently the minimum burn speed. Selecting lower speeds will not reduce the burn speed below 12x.
Read Speed
The default read speed for the
48x, 40x, 32x, 16x and 8x.
Auto Start Drive
The Auto Start Drive is used to automatically start recording, once the master disc and blank disc are inserted into the drives.
There are 3 options for this setting, Off, 1 and 2. To use this feature, change the value from OFF to 1. The 2 setting is not used. Once the value is set to 1, the system will automatically start recording once a master and blank disc are detected.
Startup Menu
The Startup Menu selection allows you to select the main menu item that appears when the
Auto Verify
The Auto Verify function can be turned On if you wish to verify every copy you make with the
Auto Compare
The Auto Compare function can be turned On if you wish to Compare every copy with the master disc. The Compare function only works with Data master discs. If there is audio or video on the master disc, the Compare function will not work. The default setting is Off.
Auto Prescan
The Auto Prescan function can be turned On if you with to Prescan every master disc before recording. The default setting is Off.
Eject Disc
There are 3 options for the Eject Disc setting:
1.Eject good discs only
2.Eject all discs
3.Do not eject discs
The default setting is to eject the good discs only.
Burn Mode
There are 3 options for the Burn Mode setting:
1. | DAO | (Disc At Once) |
2. | TAO – Not Close (Track At Once, not closed) | |
3. | TAO | (Track At Once, closed) |
The default setting is DAO. It is recommended that this setting be used.
13