Specifications – QD-MultiDrive Series
Model | Recorders | Dimensions, inches (H x W x D) | Weight, lbs |
3 | 10.5 x 8 x 17 | 21 lbs | |
5 | 17 x 8 x 18 | 33 lbs | |
| 7 | 17 x 8 x 18 | 37 lbs |
•Product Interface ATAPI/ IDE
•Read Speed 52X
•Write Speed 52X
•System Display LED
•Write Method Auto Detect (DAO, TAO )
•Operation Mode COPY, TEST, SCAN,
SAFE
•Data Buffer 1 MB
•Firmware Upgrade Via
•AC Input: 115/230 VAC; 8/5 AMPS MAX;
•Maximum Operating Temperature: 25 Degrees C.
•Relative Humidity: 30% - 80% non- condensing
Supported Formats
Multisession , HFS CD Bridge , Photo CD , CD Extra, CD+G (Karaoke)
•Recommended Media: Taiyo Yuden
CAUTION: Disconnect AC Power Cord Before Servicing. High Voltages Present with Unit Powered Off and Line Cord Connected.
Technical Support
For technical questions or support issues, contact Microboards Technology technical support:
United States | Europe | Japan |
PH: | PH: +44 (0) 845 230 7800 | PH: |
FAX: | www.microboards.co.uk | www.microboards.co.jp |
support@microboards.com |
|
|
www.microboards.com |
|
|
Please have the Model and Serial Number of your QD available when contacting Technical Support.
Any unauthorized modification to this equipment may result in the revocation by the FCC of the user’s authority to operate this equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna
•Increase the separation between the equipment and antenna
•Connect the equipment into an outlet on a circuit different than that to which the receiver is connected
•Consult the dealer or an experienced radio/TV technician for help
This product is in conformity with the EMC Directive (89/336/EEC) through compliance with the following European standards: EN 55022, EN 55024. The CE mark has been affixed in accordance with the CE Marking Directive 93/68/EEC.
Canadian Department of Communications (DOC) Statement
This Class B digital apparatus complies with the Canadian
18