Functions
There are 9 different functions for the
These instructions refer to using 7 recorder drives (available only in the
Copy
Please refer to pages
The Copy function is used to copy our master disc to the blank media,
Place your master disc into the CD reader drive.
Place your blank media into the CD Recorder drives.
1. Copy
Press the ENT button on the controller interface.
The data will now be copied to the blank discs.
Copying – 52x | 18% |
150.4MB | 01:15 |
|
|
When the job is completed, the recorded discs will be ejected from the recorder drives. The display will read:
1.0Copy
OK: 07
Test
The Test function is used to simulate copying our master disc to the blank media,
In Test mode, the blank media will remain blank and can be used again.
Place your master disc into the CD reader drive. |
|
|
Place your blank media into the CD Recorder drives. |
|
|
Press the ENT button on the controller interface. | Testing – 52x | 18% |
The duplicator will now simulate writing to the blank discs. | 150.4MB | 01:15 |
|
| |
|
|
|
When the job is completed, the recordable discs will be ejected from the recorder drives. The display will read:
2.0Test OK: 07
Test & Copy
The Test and Copy function will perform both operations, one after the other. If the Test portion passes without errors, the system will automatically start the Copy process.
To run the Test and Copy function, press the ▼▲ buttons until the 3. Test & Copy display reads:
Place your master disc into the CD reader drive. |
|
|
Place your blank media into the CD Recorder drives. |
|
|
|
|
|
Press the ENT button on the controller interface. | Testing – 52x | 18% |
The duplicator will now simulate writing to the blank discs. | 150.4MB | 01:15 |
|
|
8