Appendix 2 LCD Messages
Normal Conditions:
Initialize SDRAM | Initialize the memory of the system. |
Detect Drives | Detect what drives are connected with the system. |
User Abort! | Cancel the job during operation. |
Analyzing | Analyze the source disc. |
Source Drive Not Ready | Source drive is not ready to read. |
Target Drive Not Ready | Target drive is not ready to write. |
Source Disc Not Ready | Source disc is not ready to be read. |
Target Disc Not Ready | Target disc is not ready to be written into. |
Erasing disc | The system is erasing the data on the disc. |
Fail to get Drive Info! | The drive information cannot be obtained. |
Fail to get Src Disc Info! | The information of source disc cannot be obtained. |
Save new config Fail! | The new setting of configuration cannot be saved. |
Load Default Config? | Do you want to load the default settings? |
Preparing | The system is preparing to record. |
Check Target Please Wait | The system is checking the target device. |
Audio Disc!!! Can’t compare! | The system cannot compare the audio discs. |
Identical | The comparison results are the same. |
Read disc error | During comparison the disc cannot be read. |
Cannot read TOC | The system cannot read the contents of disc. |
TOC not match | The comparison results are not the same. |
Target overflow | The target disc hasn’t enough capacity to store new data. |
Target Disc Not Empty!!! | The target disc still has data. |
Press a Key to Eject Good Disc……………….Press any key to eject the good disc after
copying. |
|
Press a Key to Eject Fail Disc | Press any key to eject the failed disc after copying. |
Hold ESC to exit | Press ESC for a second to terminate the test. |
All data will be lost, erase? | All data on the disc will be lost. Confirm the erasing of data. |
Erase Finished | The erasing of data comes to an end. |
No Erasable Disc in | The disc on the |
Audio Editing:
Lost selected Tracks? | Abort the selected tracks and delete them. |
End edit disc and burn? | Finish the music disc editing and start to copy. |
Continue edit next Disc? | Ask if you want to continue the music disc editing. |
Target Overflow | The disc capacity is not enough to store the selected tracks. |
Close all disc’s session? | Confirm the closing of disc sessions. |
NO AUDIO track in this disc | The source disc has no audio track. |
Insert next disc | Insert the next audio disc. |
Sessions were closed already! | The disc sessions have already been closed. |
Tgt overflow, del last trk? | The disc capacity is not enough to store the selected tracks. |
Ins empty disc Continue? | Do you want to insert a blank disc and continue copying? |
Firmware Update:
Invalid firmware Disc | The disc doesn’t contain a valid firmware. |
Updating F/W | The system is updating the firmware. |
Update F/W xxx to yyy? | Do you want to update the firmware version from xxx to yyy? |
Searching F/W | The system is searching for a valid firmware. |
Check Sum Error! | The updated firmware has errors. |
Last update F/W OK! | The firmware is updated successfully. |
Last update F/W Fail! | The firmware is not updated successfully. |
Flash ROM fail! | Data cannot be written into Flash ROM. |
7/2008