MicroBoards Technology Premium Pro Series user manual Simulation Disc to Disc, Erasing RW media

Page 10

DVD Premium Pro Series

MICROBOARDS TECHNOLOGY, LLC

4. Press the NO or ▼ button until you the screen displays MASTER CLEAR? (HDD):

MASTER CLEAR? (HDD)

5.Press the YES button

6.You can now select which hard drive partition to erase. Pressing the NO or ▼ button will scroll you though the partition selections.

7.Press the YES button if you are sure you want to clear the HDD.

8.The hard drive will now be cleared and you will be asked if you want to register another master to the HDD.

>HDD1?

(DISC to HDD)

9.Press YES and the Reader drive will eject and you can insert another master to register to the HDD.

REGISTER

 

 

4.0GB

DVD

 

 

 

 

25%

10. Press NO and to exit this menu without registering data to the hard drive partition.

Simulation Disc to Disc

Important: Simulation is not allowed when using DVD+R/RW media.

1.At the COPY START? (DISC to DISC) menu, press the NO or ▼ button until the display shows SIMULATION? (DISC to DISC).

SIMULATION?? (DISC to DISC)

2.Place the Master Disc into the Reader drive

3.Place the blank disc(s) into the Recorder drive(s) and wait 10 seconds for the light(s) on the front of the Recorder(s) to stop blinking.

4.Press YES.

5.The drive trays will open on any recorder without blank discs installed. If you do not want to make a copy in those drives, close the tray(s), wait for the drive light to go out, and then press the YES button to start the copy job.

6.The display will now show the progress of the Simulation Copy Job

SIMULATION

 

 

 

4.0GB

DVD

 

 

 

 

25%

7. The Recorder(s) will eject the DVD-R discs when the job is complete.

Note: DVD-R media will NOT be recorded to in Simulation Mode.

Erasing RW media

1.At the COPY START? (DISC to DISC) menu, press the NO or ▼ button until the display shows DISC ERASE? (REWRITABLE):

DISC ERASE? (REWRITABLE)

2.Load the Recorder(s) with the CD-RW or DVD-+RW media you wish to erase. You can erase one disc at a time or fill all the Recorders to erase multiple discs at once. All discs loaded must be of the same type.

3.Press the YES button

10

Image 10
Contents DVD Premium Pro Series Microboards TECHNOLOGY, LLC Table of Contents Microboards TECHNOLOGY, LLC Unpacking your system System OverviewCopy Start Disc to Disc Installation Requirements Power supplyMain Menu Master DiscCopy Copy Disc to DiscRegistering Data to the Hard Drive HDD DVDRegister Copy Hard Drive HDD to DiscClearing the Hard Drive HDD Master SELECT? DiscMaster CLEAR? HDD Simulation Disc to DiscErasing RW media SimulationTrack Extraction Copy to HDD OK? Error status in Track ExtractionEND EXTRACTION? Next MasterSetup Menu RecorderDVD WR Speed Mode SelectHDD Setup CD WR SpeedVersion UpdateDrive Inquiry LogError Codes Read Errors ASC AscqChanged Operating Definition Inquiry Data has Changed Write Errors Write ERROR-RECOVERED with Auto Reallocation Changed Operating Definition Inquiry Data has Changed Ovaerlapped Commands Attempted Erase Failure Supported Formats SpecificationsFirmware Updates Technical SupportTower Models