MicroBoards Technology Premium Pro Series user manual Tower Models

Page 23

DVD Premium Pro Series

MICROBOARDS TECHNOLOGY, LLC

Tower Models

Any unauthorized modification to this equipment may result in the revocation by the FCC of the user’s authority to operate this equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna

Increase the separation between the equipment and antenna

Connect the equipment into an outlet on a circuit different than that to which the receiver is connected

Consult the dealer or an experienced radio/TV technician for help

This product is in conformity with the EMC Directive (89/336/EEC) through compliance with the following European standards: EN 55022, EN 55024. The CE mark has been affixed in accordance with the CE Marking Directive 93/68/EEC.

Canadian Department of Communications (DOC) Statement

This Class B digital apparatus complies with the Canadian ICES-003 Issue 4:2004. Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canade.

Rackmount Models

Any unauthorized modification to this equipment may result in the revocation by the FCC of the user’s authority to operate this equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense.

This product is in conformity with the EMC Directive (89/336/EEC) through compliance with the following European standards: EN 55022, EN 55024. The CE mark has been affixed in accordance with the CE Marking Directive 93/68/EEC.

Canadian Department of Communications (DOC) Statement

This Class A digital apparatus complies with the Canadian ICES-003 Issue 4:2004. Cet appareil numerique de la classe A est conforme a la norme NMB-003 du Canade.

23

Image 23
Contents DVD Premium Pro Series Microboards TECHNOLOGY, LLC Table of Contents Microboards TECHNOLOGY, LLC Copy Start Disc to Disc System OverviewUnpacking your system Power supply Installation RequirementsMaster Disc Main MenuDVD Copy Disc to DiscRegistering Data to the Hard Drive HDD CopyMaster SELECT? Disc Copy Hard Drive HDD to DiscClearing the Hard Drive HDD RegisterSimulation Simulation Disc to DiscErasing RW media Master CLEAR? HDDTrack Extraction Next Master Error status in Track ExtractionEND EXTRACTION? Copy to HDD OK?Recorder Setup MenuCD WR Speed Mode SelectHDD Setup DVD WR SpeedLog UpdateDrive Inquiry VersionASC Ascq Error Codes Read ErrorsChanged Operating Definition Inquiry Data has Changed Write Errors Write ERROR-RECOVERED with Auto Reallocation Changed Operating Definition Inquiry Data has Changed Ovaerlapped Commands Attempted Erase Failure Technical Support SpecificationsFirmware Updates Supported FormatsTower Models