MicroBoards Technology Premium Pro Series user manual Track Extraction

Page 11

DVD Premium Pro Series

MICROBOARDS TECHNOLOGY, LLC

4.The next screen asks if you want to perform a Quick Erase.

QUICK ERASE?

If you wish to perform a Full Erase, press the NO button.

FULL ERASE?

Pressing the YES button at either of these selections will show the following screen:

SURE?

5.Press the YES button if you are sure you want to erase the DVD-+RW disc. If you do not wish to erase the disc, press the NO button and you will go back to the DISC ERASE screen (step 1).

6.The screen will now show:

DISC ERASE

7. Once the erasing is complete, the Recorder(s) will eject the disc(s).

Track Extraction

When extracting tracks to the internal hard drive, the DVD Premium Pro Series will use the next available partition space on the hard drive. Like any time a master is registered to the hard drive, you have the ability to name the partition.

1. At the COPY START? Menu, press the NO or ▼ button until the display reads:

Trk EXTRACTION? (CDtoHDD)

Press the YES button.

2.Press YES again in the following screen.

EXTRACTION OK?

3.You will see this screen after the contents of the master have been analyzed:

NAME?

79:28

(_

)

If you do not have the Auto Generate in the Setup menu feature turned on, use the ▲or ▼buttons to change the character in the position shown by the cursor. Press the YES button to move the cursor to the right or NO to move back to the left. Once the cursor is on the 14th character, press YES to begin registering the master.Insert a master audio disc into the reader drive. CWT Pro Series will analyze the master disc.

4.Next, it displays Selected Track Number / Total Track Number. This master data has total 12 tracks.

EXTRACT THE Trk? TRK 01/12

Press NO or ▼ to skip forward a track. Press YES to select the track you want to extract.

11

Image 11
Contents DVD Premium Pro Series Microboards TECHNOLOGY, LLC Table of Contents Microboards TECHNOLOGY, LLC Copy Start Disc to Disc System OverviewUnpacking your system Power supply Installation RequirementsMaster Disc Main MenuDVD Copy Disc to DiscRegistering Data to the Hard Drive HDD CopyMaster SELECT? Disc Copy Hard Drive HDD to DiscClearing the Hard Drive HDD RegisterSimulation Simulation Disc to DiscErasing RW media Master CLEAR? HDDTrack Extraction Next Master Error status in Track ExtractionEND EXTRACTION? Copy to HDD OK?Recorder Setup MenuCD WR Speed Mode SelectHDD Setup DVD WR SpeedLog UpdateDrive Inquiry VersionASC Ascq Error Codes Read ErrorsChanged Operating Definition Inquiry Data has Changed Write Errors Write ERROR-RECOVERED with Auto Reallocation Changed Operating Definition Inquiry Data has Changed Ovaerlapped Commands Attempted Erase Failure Technical Support SpecificationsFirmware Updates Supported FormatsTower Models