DVD Premium Pro Series | MICROBOARDS TECHNOLOGY, LLC |
29 | 00 |
29 | 01 |
29 | 02 |
29 | 03 |
29 | 04 |
2A | 00 |
2A | 01 |
2A | 02 |
2A | 03 |
2B | 00 |
2C | 00 |
2800
2900
2A | 00 |
2A | 01 |
2C | 00 |
2C | 03 |
2C | 04 |
2C | 05 |
2E | 00 |
2F | 00 |
30 | 00 |
30 | 01 |
30 | 02 |
30 | 05 |
30 | 06 |
30 | 08 |
3009
3100
3101
3200
32 | 01 |
35 | 00 |
35 | 01 |
35 | 02 |
35 | 03 |
35 | 04 |
37 | 00 |
39 | 00 |
3A | 00 |
3A | 01 |
3A | 02 |
3D | 00 |
3E | 00 |
3E | 01 |
3E | 02 |
3F | 00 |
3F | 01 |
3F | 02 |
3F | 03 |
40 | NN |
4300
4400
4500
4600
4700
4800
4900
4A | 00 |
4B | 00 |
4C | 00 |
4D | NN |
POWER ON, RESET, OR BUS DEVICE RESET OCCURRED POWER ON OCCURRED
SCSI BUS RESET OCCURRED
BUS DEVICE RESET FUNCTION OCCURRED DEVICE INTERNAL RESET PARAMETERS CHANGED
MODE PARAMETERS CHANGED
LOG PARAMETERS CHANGED
RESERVATIONS PREEMPTED
COPY CANNOT EXECUSE SINCE HOST CANNOT DISCONNECT COMMAND SEQUENCE ERROR
NOT READY TO READY CHANGE, MEDIUM MAY HAVE CHANGED POWER ON, RESET, OR BUS DEVICE RESET OCCURRED PARAMETERS CHANGED
MODE PARAMETERS CHANGED
COMMAND SEQUENCE ERROR
CURRENT PROGRAM AREA IS NOT EMPTY CURRENT PROGRAM AREA IS EMPTY PERSISTENT PREVENT CONFLICT INSUFFICIENT TIME FOR OPERATION COMMANDS CLEARED BY ANOTHER INITIATOR INCOMPATIBLE MEDIUM INSTALLED CANNOT READ MEDIUM - UNKNOWN FORMAT CANNOT READ MEDIUM - INCOMPATIBLE FORMAT CANNOT WRITE MEDIUM - INCOMPATIBLE FORMAT CANNOT FORMAT MEDIUM - INCOMPATIBLE MEDIUM CANNOT WRITE - APPLICATION CODE MISMATCH CURRENT SESSION NOT FIXATED FOR APPEND MEDIUM FORMAT CORRUPTED
FORMAT COMMAND FAILED
NO DEFECT SPARE LOCATION AVAILABLE DEFECT LIST UPDATE FAILURE ENCLOSURE SERVICES FAILURE UNSUPPORTED ENCLOSURE FUNCTION ENCLOSURE SERVICES UNAVAILABLE ENCLOSURE SERVICES TRANSFER FAILURE ENCLOSURE SERVICES TRANSFER REFUSED ROUNDED PARAMETER
SAVING PARAMETERS NOT SUPPORTED MEDIUM NOT PRESENT
MEDIUM NOT PRESENT - TRAY CLOSED MEDIUM NOT PRESENT - TRAY OPEN INVALID BITS IN IDENTIFY MESSAGE LOGICAL UNIT HAS NOT
TIMEOUT ON LOGICAL UNIT
TARGET OPERATING CONDITIONS HAVE CHANGED MICROCODE HAS BEEN CHANGED
CHANGED OPERATING DEFINITION INQUIRY DATA HAS CHANGED
DIAGNOSTIC FAILURE ON COMPONENT NN
INTERNAL TARGET FAILURE SELECT OR RESELECT FAILURE UNSUCCESSFUL SOFT RESET SCSI PARITY ERROR
INITIATOR DETECTED ERROR MESSAGE RECEIVED INVALID MESSAGE ERROR
COMMAND PHASE ERROR DATA PHASE ERROR
LOGICAL UNIT FAILED
20