Magnavox MRD500VR owner manual Speaker setup, Putting Batteries in the Remote Control

Page 18
Hook the slot in the speaker’s bracket onto the wall- mounted screw.

18 Speaker Setup (cont’d), Remote Control Setup

Speaker setup

You can hang the front, center and rear (Surround) speakers on a wall. Each speaker needs one screw (not supplied) for mounting. Use the type and size of screw as shown at right.

1 Attach a supplied bracket to the back of each speaker with one of the supplied screws.

2 Drive a screw into the wall. Make sure the screw and the wall can support 11 lbs. (5 Kg.). Drive the screw until the screw head extends about 0.1” (3.5 mm) from the wall.

3

Caution

Check the stability of the ceiling or wall. Magnavox is not liable for accidents caused by insufficient stability of the ceiling or wall or for improper mounting.

The speaker may fall due to unstable mounting.

If you need assistance, contact Magnavox.

Do not modify or change the fittings of the supplied speakers,

mounting brackets, and screws. Use these brackets to mount the supplied speakers only. Do not load anything else on these fittings.

Do not step on or hang from the speakers. Pay special attention to small children to ensure their safety.

1

2

3

Putting Batteries in the Remote Control

1 Remove the battery compartment lid on the bottom of the remote control by pressing the tab, then lifting the lid.

2 Place two AA batteries inside the battery compartment with their + and – ends aligned as indicated.

3 Replace the battery compartment lid.

Using the Remote Control

Point the remote control at the System’s remote sensor (marked IR, see page 24) when using the remote to operate the System. Do not point the remote at the TV.

Do not put objects between the remote and the System.

Recycling Guidelines/Battery Safety

Your new product and its packaging contain materials that can be recycled and reused. Specialized companies can recycle your product to increase the amount that needs to be properly disposed.Your product uses batteries that should not be thrown away when depleted but should be disposed of as small chemical waste. Please find out about the local regulations on disposal of your old product, batteries, and packaging whenever you replace existing equipment.

Battery Usage CAUTION - To prevent battery leakage that may result in bodily injury, property damage, or damage to the unit: Install ALL batteries correctly, with the + and - markings on the battery aligned as indicated on the unit;

Do not mix batteries, for example, old with new or carbon with alkaline; and

Remove batteries when the unit will not be used for a long time.

1

2

3

Image 18
Contents MRD500VR Dear Magnavox product owner For Customer UseModel No Serial No Declaration of Conformity Safety and General InformationSafety Precautions Model Number MRD500VR Trade Name MagnavoxTable of Contents Introduction Playable Discs and Video Cassettes Before you begin HookupsDetermining the best possible connection RememberHookups cont’d AntennaWith this connection Helpful HintTo watch one channel while recording another Example onlyAntenna Or Cable TV Signal Red/white Component Audio Cables Video Connecting the System to a TV that has an S-Video In jack Video CableConnecting the System to a TV and a Stereo Back of TV example only Yellow Video CableCoaxial Digital Audio Cable Antenna Connections AM AntennaFM Antenna Speaker Setup Connecting the speaker wires to the speaker jacksSetting up Surround Sound Using the Remote Control Speaker setupPutting Batteries in the Remote Control Recycling Guidelines/Battery SafetyFirst-time Setup 1Turn on the TVRead and follow the steps below to play a tape Other tape playback features are on pagesVideo Cassette Playback 1Turn on the TV 2Insert a tape in the SystemDisc Playback 4Insert a DiscRemote Control Remote Control cont’d Front Panel Front Panel cont’d Display Panel Display MessagesRear Panel Press o or p to select Auto SET UP. Press B Channel SetupPress o or p to select Channel SET UP. Then, press B Press VCR, then press DISC/MENU so the main menu appearsChannel Setup cont’d Adding/Deleting ChannelsWhile the Month space is flashing, press o or p Clock VCRPress o or p to select Clock SET, then press B Until the month appears. Then, press BClock VCR cont’d Language VCR VCR Status Displays Press Display again to remove all the displaysBegins, press Stop C Videotape RecordingRecording Prevention Details about tape speed are onRecording One Channel/Watching Another 2Press Record I on the front of the System One-Touch RecordingStopping an OTR You cannot pause an OTRRerecording Tape Duplication Put the unit in VCR mode if necessaryUnit in VCR mode if necessary System Plays tapePress o or p to select an empty program.Then, press Timer RecordingSet the clock. Details are on pages Press o or p to select ONCE, DAILY, or WeeklyNext, press o or p until the day appears.Then, press Timer Recording cont’dPress o or p until the month appears beside Date Details are on page nineCancelling Timer Recordings 10Press C-RESET/CLEARto store the timer recordingPress VCR so the red VCR light appears on the front DVD to Videotape DuplicationThis will be possible only if the DVD is not copy protected SystemPress o or p to select Auto Repeat Repeat PlayFollow the steps below to play a videotape repeatedly Press B so on appears next to Auto RepeatTape Counter Time Search, Index Search Time SearchIndex Search Super High Speed Searching LP/SLP Special Effects PlaybackForward and Reverse Searching SP/LP/SLP Viewing a Still PictureAutomatic Operation Features Multi-Channel Television Sound Understanding DisplaysPress DISC/MENU to remove the menu Hi-Fi Stereo Press o or p to select Audio OUT. Then, press BPress o or p to select HIFI. on will appear beside Hifi Digital Sound, Surround Sound Digital SoundSurround Sound Delay Time Press DVD to put the System in DVD mode. The redPress SETUP/PROG to remove the menu Delay Time cont’dDelay Time will be selected. Press OK Press p to select 5.1CH, then press OKSpeaker Balance To stop Disc play if necessaryPress p to select BALANCE, then press OK 11Press SETUP/PROG to remove the menuSpeaker Balance cont’d Test will be selected. Press OKWith a DVD in the System, press DISC/MENU. Using the Title MenuDVD Disc Menus Press o, p, s, or B to select an item, then press OKFast Forward/Reverse Search During playback, press FF g or REW hPress Play B to return to normal playback Title/Chapter Playback,Time Playback Title/Chapter PlaybackTime Playback Using the Number Buttons Using Search ModeUsing Skip i /CH o or Skip j/ CH p Paused and Step-by-Step Playback, Resume Paused and Step-by-Step PlaybackResume Repeat Until the repeat mode you want appears on the TVRepeat, A-B Repeat During DVD or Audio CD playback, press RepeatMarkers Are available /6. After a few seconds, the subtitles will SubtitlesCamera Angles Press DVDZoom Slow Motion, ZoomSlow Motion Press Pause F during DVD playbackWhile play is stopped, press MODE/SPEED ProgramsRandom Play While the Random screen appears, pressPress OK.You are finished! Go to step Parental Controls PasswordPress B to select Lock, then press OK. The first Press p to select CHANGE, then press OKThen press OK. This menu will appear Parental LevelsPress B to select Custom at the top of the menu Press B to select Lock, then press OKAudio Language, Stereo Sound Audio LanguageStereo Sound To stop playback, press Stop C MP3/JPEG/Picture CD PlaybackPut a Disc in the DVD Player of the System Jpeg Files have the icon68 MP3/JPEG/Picture CD Displays Press Display again to remove the displayDisplay When Disc play is stopped, press SETUP/PROG.Press SETUP/PROG to remove the menus Display, then press OKWhile playback is stopped, press SETUP/PROG. LanguagePress o or p to select a language, then press OK. Language cont’dLanguage Codes MENU, press four Number buttons to enterMenu, then press OK AudioPress B to select Audio at the top Press o or p to select DRC, Dolby DIGITAL, orOn-Screen Displays DVD DisplayAudio CD Display During DVD playback, press MODE/SPEED so the Black Black LevelBlack Level Within 10 seconds, press OK repeatedly to choose onPress Tuner to select Tuner mode. The red Tuner To set up preset radio stations, seeSelecting Radio Stations Press AUDIO/BAND to select FM or AMPreset Radio Stations Automatic PresettingManual Presetting Glossary, Specifications SpecificationsGlossary Helpful Hints Helpful Hints cont’d VCR will not record a TV program Power FailureVCR will not perform a timer recording Number buttons won’t work for TV channels aboveYou cannot insert a video cassette Line Input modeCleaning the Video Heads You cannot remove the tapeLimited Warranty Contact Magnavox to arrange an exchangePlease contact Magnavox at French Speaking Page Information Index Controls