Magnavox MRD500VR owner manual Disc Playback, 4Insert a Disc

Page 21

E9000(P01-54).QX33.latest 03.6.5 2:51 AM Page 21

Before you begin, turn on the TV and set it to the correct Video In channel. Details are on pages 7-15.

1 Press STANDBY-ON y to turn on the System.

2 Press DVD so the red DVD light appears on the front of the System.

3 Press OPEN/CLOSE A (to the right of the disc tray on the front of the System) to open the Disc tray.

4 Place a Disc into the tray. If the DVD is recorded on only one side, place the Disc in the tray with the label facing up and the shiny side facing down.

Some DVDs are recorded on both sides. Make sure the label of the side you want to play is facing up.

5 Press PLAY B. The tray will close and play will begin. If a DVD menu appears instead, see page 54.With some Audio CDs, play will not begin unless you press PLAY B.

You also can press OPEN/CLOSE A or press the tray toward the System to close the tray.

6 Press STOP C to stop playback.

Remember, the DVD Player of this System will play only certain Discs.

See page six for details.

Disc Playback 21

 

 

STANDBY-ON

1

 

TIMER SET

 

 

 

SETUP/

AUDIO/

ANGLE

 

PROG

BAND SUBTITLE

 

REC

DISPLAY

ZOOM

 

 

 

C-RESET

 

 

 

SKIP/

CLEAR

SKIP/

 

 

CH

CH

 

2

 

 

TITLE

MODE/SPEED

RETURN

 

 

TUNER

 

 

DVD

 

VCR

 

DISC

 

 

 

MENU

 

OK

 

6

STOP

 

PLAY

5

REW

 

FF

PAUSE

3Press OPEN/CLOSE A on the front of the System.

4Insert a Disc.

Helpful Hints

An “X” may appear at the top right corner of the TV screen when you try a feature. Either the feature is not available on the Disc, or the System cannot access the feature at this time.This does not indicate a problem with the System.

If a Disc is dirty or scratched, the picture may appear distorted or play may stop. Remove the Disc and turn off the System. Disconnect the power cord, then reconnect it. Clean the Disc, then turn on the System again and reinsert the Disc.You may need to repeat the System’s setup because of the temporary power loss.

When the DVD or CD light appears on the display panel, the Disc is loaded and ready to play.

When you press OPEN/CLOSE A or PLAY B (DVD) on the front of the System when the power is off, the System will turn on in DVD mode. Otherwise, the System will turn on in the mode in which it was turned off.

Do not use the DVD Player features when the System is in Tuner mode.You may hear noises through the speakers or the displays may be incorrect.

Image 21
Contents MRD500VR Dear Magnavox product owner For Customer UseModel No Serial No Safety Precautions Safety and General InformationDeclaration of Conformity Model Number MRD500VR Trade Name MagnavoxTable of Contents Introduction Playable Discs and Video Cassettes Determining the best possible connection HookupsBefore you begin RememberAntenna Hookups cont’dHelpful Hint With this connectionExample only To watch one channel while recording anotherAntenna Or Cable TV Signal Red/white Component Audio Cables Video Video Cable Connecting the System to a TV that has an S-Video In jackBack of TV example only Yellow Video Cable Connecting the System to a TV and a StereoCoaxial Digital Audio Cable Antenna Connections AM AntennaFM Antenna Speaker Setup Connecting the speaker wires to the speaker jacksSetting up Surround Sound Putting Batteries in the Remote Control Speaker setupUsing the Remote Control Recycling Guidelines/Battery Safety1Turn on the TV First-time SetupVideo Cassette Playback Other tape playback features are on pagesRead and follow the steps below to play a tape 1Turn on the TV 2Insert a tape in the System4Insert a Disc Disc PlaybackRemote Control Remote Control cont’d Front Panel Front Panel cont’d Display Messages Display PanelRear Panel Press o or p to select Channel SET UP. Then, press B Channel SetupPress o or p to select Auto SET UP. Press B Press VCR, then press DISC/MENU so the main menu appearsAdding/Deleting Channels Channel Setup cont’dPress o or p to select Clock SET, then press B Clock VCRWhile the Month space is flashing, press o or p Until the month appears. Then, press BClock VCR cont’d Language VCR Press Display again to remove all the displays VCR Status DisplaysRecording Prevention Videotape RecordingBegins, press Stop C Details about tape speed are onRecording One Channel/Watching Another Stopping an OTR One-Touch Recording2Press Record I on the front of the System You cannot pause an OTRUnit in VCR mode if necessary Put the unit in VCR mode if necessaryRerecording Tape Duplication System Plays tapeSet the clock. Details are on pages Timer RecordingPress o or p to select an empty program.Then, press Press o or p to select ONCE, DAILY, or WeeklyPress o or p until the month appears beside Date Timer Recording cont’dNext, press o or p until the day appears.Then, press Details are on page nine10Press C-RESET/CLEARto store the timer recording Cancelling Timer RecordingsThis will be possible only if the DVD is not copy protected DVD to Videotape DuplicationPress VCR so the red VCR light appears on the front SystemFollow the steps below to play a videotape repeatedly Repeat PlayPress o or p to select Auto Repeat Press B so on appears next to Auto RepeatTape Counter Time Search, Index Search Time SearchIndex Search Forward and Reverse Searching SP/LP/SLP Special Effects PlaybackSuper High Speed Searching LP/SLP Viewing a Still PictureAutomatic Operation Features Multi-Channel Television Sound Understanding DisplaysPress DISC/MENU to remove the menu Hi-Fi Stereo Press o or p to select Audio OUT. Then, press BPress o or p to select HIFI. on will appear beside Hifi Digital Sound, Surround Sound Digital SoundSurround Sound Press DVD to put the System in DVD mode. The red Delay TimeDelay Time will be selected. Press OK Delay Time cont’dPress SETUP/PROG to remove the menu Press p to select 5.1CH, then press OKTo stop Disc play if necessary Speaker BalanceSpeaker Balance cont’d 11Press SETUP/PROG to remove the menuPress p to select BALANCE, then press OK Test will be selected. Press OKDVD Disc Menus Using the Title MenuWith a DVD in the System, press DISC/MENU. Press o, p, s, or B to select an item, then press OKFast Forward/Reverse Search During playback, press FF g or REW hPress Play B to return to normal playback Title/Chapter Playback,Time Playback Title/Chapter PlaybackTime Playback Using the Number Buttons Using Search ModeUsing Skip i /CH o or Skip j/ CH p Paused and Step-by-Step Playback, Resume Paused and Step-by-Step PlaybackResume Repeat, A-B Repeat Until the repeat mode you want appears on the TVRepeat During DVD or Audio CD playback, press RepeatMarkers Camera Angles SubtitlesAre available /6. After a few seconds, the subtitles will Press DVDSlow Motion Slow Motion, ZoomZoom Press Pause F during DVD playbackRandom Play ProgramsWhile play is stopped, press MODE/SPEED While the Random screen appears, pressPress B to select Lock, then press OK. The first Parental Controls PasswordPress OK.You are finished! Go to step Press p to select CHANGE, then press OKPress B to select Custom at the top of the menu Parental LevelsThen press OK. This menu will appear Press B to select Lock, then press OKAudio Language, Stereo Sound Audio LanguageStereo Sound Put a Disc in the DVD Player of the System MP3/JPEG/Picture CD PlaybackTo stop playback, press Stop C Jpeg Files have the iconPress Display again to remove the display 68 MP3/JPEG/Picture CD DisplaysPress SETUP/PROG to remove the menus When Disc play is stopped, press SETUP/PROG.Display Display, then press OKLanguage While playback is stopped, press SETUP/PROG.Language Codes Language cont’dPress o or p to select a language, then press OK. MENU, press four Number buttons to enterPress B to select Audio at the top AudioMenu, then press OK Press o or p to select DRC, Dolby DIGITAL, orOn-Screen Displays DVD DisplayAudio CD Display Black Level Black LevelDuring DVD playback, press MODE/SPEED so the Black Within 10 seconds, press OK repeatedly to choose onSelecting Radio Stations To set up preset radio stations, seePress Tuner to select Tuner mode. The red Tuner Press AUDIO/BAND to select FM or AMPreset Radio Stations Automatic PresettingManual Presetting Glossary, Specifications SpecificationsGlossary Helpful Hints Helpful Hints cont’d VCR will not perform a timer recording Power FailureVCR will not record a TV program Number buttons won’t work for TV channels aboveCleaning the Video Heads Line Input modeYou cannot insert a video cassette You cannot remove the tapeLimited Warranty Contact Magnavox to arrange an exchangePlease contact Magnavox at French Speaking Page Controls Information Index