Magnavox MRD500VR Cancelling Timer Recordings, 10Press C-RESET/CLEARto store the timer recording

Press VCR, then press DISC/MENU.

E9000(P01-54).QX33.latest 03.6.5 2:51 AM Page 40

40 Timer Recording (cont’d)

9 Press o or p to select a recording tape speed. The arrow will appear beside your choice.The selected speed will flash beside REC SPEED. Tape speed details are on page 77.

ONE TIME PROGRAM

PROGRAM NUMBER 1

DATE	05	/ 04 TUE
START TIME	07	: 30	PM
END TIME	08	: 30	PM
CHANNEL	16
REC SPEED	SP
	B SP

SLP

10Press C-RESET/CLEARto store the timer recording.

11Press TIMER SET. The System will turn off and the red TIMER REC light will appear on the front of the System. Or, the System may switch to DVD mode instead. You may use the DVD Player during a timer recording.You may need to press VCR/TV on the remote to choose TV position so you can see the DVD picture at the TV.

If you want to use the VCR until time for the recording, don’t press TIMER SET until a few minutes before the recording should start. Or, press TIMER SET only when you know you won’t be using the VCR anymore (until after the recording). When the TIMER REC light is on or blinking, you cannot put the System in VCR mode by pressing VCR or SOURCE.You must first press TIMER SET to cancel the timer recording temporarily.Then, you can use the VCR features again.

STANDBY-ON

TIMER SET
SETUP/	AUDIO/	SUBTITLE		ANGLE
PROG	BAND
REC	DISPLAY			ZOOM
	C-RESET
SKIP/	CLEAR			SKIP/
CH				CH
TITLE	MODE/SPEED			RETURN
	TUNER
DVD				VCR
DISC
MENU				OK
STOP				PLAY
REW				FF
	PAUSE
				SLOW
1	2		3
				VCR/TV
4	5		6
			SEARCH MODE
7	8		9
		REPEAT		REPEAT
+10	0			A-B
SURROUND	SOUND		VOLUME

– +

11

10

9

Cancelling Timer Recordings

1

2 Press o or p to select TIMER PROGRAMMING, then press B.

3 Press o or p to find the program you want to cancel.

4	While the program number is flashing, press s to
	clear all the information for that program.
	ONE TIME PROGRAM
	PROGRAM NUMBER			1
	DATE	05	/ 04 TUE
	START TIME	07	: 30	PM
	END TIME	08	: 30	PM
	CHANNEL	16
	REC SPEED	SP

5 Press C-RESET/CLEAR to remove the menu.

Helpful Hints

•To change incorrect information, press s or B to choose the item you want to change. Press o or p to adjust the information.

•If a timer recording is set and the TIMER REC light is on, pressing STOP/EJECT CA will turn on the System and/or cancel the timer recording.The TIMER REC light will turn off. Press STOP/EJECT CA again to remove the tape.To use the VCR or watch TV through the System again, press VCR, then VCR/TV to put the VCR in VCR position again.

•If there is no tape in the VCR when you press TIMER SET, the TIMER REC light will flash. Insert a tape.