Magnavox MDV 530 VR Hookups, Determining the best possible connection, Before you begin, Remember

Page 7

Hookups 7

Determining the best possible connection...

Your hookup will be determined primarily by your existing equipment, especially your TV. However, the follow- ing guidelines describe which options have the best picture (video) and sound (audio) quality. You will not use all the jacks on the DVD/VCR.

If your TV only has an RF-style jack, usually labelled Antenna In, RF In, or 75 ohm, use the ANT- OUT jack of the DVD/VCR to connect to the TV. This hookup provides both audio and video in a single cable. Set your TV to channel 3 or 4 - the output channel of the DVD/VCR. This connection allows you to use both the DVD and VCR features. Details are on page eight.

★★★★If your television has Component Video In jacks (which also could be labelled Y Cr Cb, Y Pr Pb, or YUV and may be green, blue, and red), use the Component Video jacks (Y CR CB) for the best picture quality.

If you use only this video connection, only the DVD picture will be available. To see DVD fea- tures on the TV, set the TV to its Component Video In channel. Details are on page 12.

★★★If your TV has an S-Video In jack (which also may be labelled Y/C or S-VHS), use the S-Video

jack for excellent picture quality. If you use only this video connection, only the DVD picture will be available. To see DVD features on the TV, set the TV to its S-Video In channel. Details are on page 13.

★★If your TV has a single yellow Video In jack (which also may be labelled CVBS, Composite, or baseband), use the yellow Video jack for good picture quality. This connection provides a picture for both the DVD Player and the VCR. To see DVD or VCR features on the TV, set the TV to its Video In channel. Details are on page 11.

★★★If you have a Stereo with a Coaxial Digital Audio In jack, this provides the clearest sound for the DVD Player. Connect the DVD/VCR’s COAXIAL DIGITAL AUDIO OUT jack to your Stereo for the best sound quality. If you use only this audio connection, only Disc sound (no VCR) will be available. Details are on page 15.

★★★★If digital audio connections are not possible, connect the DVD/VCR’s red and white DVD/VCR AUDIO OUT jacks to the Audio In jacks of your Stereo or TV. This connection provides sound for both the DVD Player and the VCR. Details are on pages 11-14.

Before you begin...

Refer to the manuals of your TV, Cable Box, Stereo, or other devices as necessary. Note the style of jacks and connectors on the other equipment. Determine how to choose different Audio and Video In channels on your other equipment so you can see and hear the DVD/VCR material playing on the TV, Stereo, etc.

Disconnect all equipment from the power outlets. Connect the equipment to the power outlets only after you have finished hooking up everything. Never make or change connections with equipment connected to the power outlet.

Remember...

Set the TV to the correct Video In channel. Such channels may be called AUX or AUXILIARY IN, AUDIO/VIDEO or A/V IN, EXT1 or External In, etc. These channels often are located near channel 00. See your TV owner’s manual for details. If you do not see the DVD or VCR playback on the TV, go to the low- est TV channel (01 or 02) and change channels downward until you see the DVD or VCR picture on the TV. Or, if your TV has only a single Antenna In jack and you are using the RF coaxial cable (as described on page eight), set the TV to channel 3 or 4.

To help you find the right Audio/Video In channel, turn on the DVD/VCR. Press DVD to put the DVD/VCR in DVD mode. With no Disc in the Player, a large DVD Video logo will appear on the TV screen when you get the TV on the correct Audio/Video In channel or channel 3 or 4.

Set the Stereo to the correct channel or “source” mode.

Depending on your connection, you may need to purchase additional cables or adaptors.

To use the VCR features, you must include a connection with the supplied yellow video cable and red/white audio cables or with the supplied RF coaxial cable.

Once you determine the best option, find your choice on pages 8-15. Follow the specific steps for the hookup you choose. After hooking up the DVD/VCR, go to page 17 to complete the first-time setup.

Image 7
Contents MDV530VR For Customer Use Dear Magnavox product ownerModel No Serial No Safety Precautions Safety and General InformationDeclaration of Conformity Table of Contents Introduction Color Systems Playable Discs and Video CassettesPlayable Discs Region CodesRemember HookupsDetermining the best possible connection Before you beginHookups cont’d Signal2DVD/VCR ConnectionsRF coaxial cable Cable SignalChannel 03 or Video in Jacks On TV 2Audio Cables Video Cable DVD/VCR to a TV that has Component Video In jacks DVD/VCR to a TV that has an S-Video In jack Antenna/Cable TV SignalDVD/VCR to a TV and a Stereo 1Antenna/Cable TV SignalHookups cont’d Using Digital Audio connectionsRecycling Guidelines/Battery Safety Remote Control SetupPutting Batteries in the Remote Control Using the Remote ControlRepeat this process if the power fails First-time DVD/VCR SetupTurn on the TV Video Cassette Playback Other tape playback features are on pagesDetails are on pages 4Insert a Disc Disc PlaybackPress OPEN/CLOSE a On the DVD/VCRSTANDBY-ON Light Display MessagesDisplay DVD Light red Disc trayCassette Compartment Timer REC LightDisplay Panel VCR Counter/Clock/ChannelFront Panel VCR Audio in Jacks AC Power CordANT-IN Antenna In Jack DVD Audio OUT Jacks Left white and Right redRemote Control Remote Control cont’d Now when you press Skip i/CHo or Skip j Channel SetupPress o or p to select Channel SET UP. Then, press B Press o or p to select Auto SET UP. Press BAdding/Deleting Channels Channel Setup cont’dDay appears. Then, press B Clock VCRFollow these steps to set the VCR clock. Make sure While the DAY space is flashing, press o or p untilClock VCR cont’d Press o or p to choose Language SELECT, then press B Press C-RESET/CLEAR to remove the menuPress o or p to select English Press C-RESET/CLEAR Language VCRPress Display again to remove all the displays VCR Status DisplaysChannel numbers appear on Recording Prevention Videotape RecordingSelect the channel you want to watch at the TV Recording One Channel/Watching AnotherYou cannot pause an OTR One-Touch RecordingStopping an OTR Press Record on the DVD/VCRMake the connections shown above Rerecording Tape DuplicationPlaying unit To the TV’s Antenna in JackTimer Recording Details are on page nine Timer Recording cont’dEnter the information while the space is flashing Press o or p to select a recording tape speed. Cancelling Timer RecordingsDVD Put the DVD you want to copy in the disc tray DVD to Videotape DuplicationBe possible only if the DVD is not copy protected Before you beginPress o or p to select Auto Repeat Repeat PlayPress B so on appears next to Auto Repeat Tape Counter Time Search Time Search, Index SearchIndex Search Viewing a Still Picture Special Effects PlaybackForward and Reverse Searching SP/LP/SLP Super High Speed Searching LP/SLPAutomatic Operation Features Understanding Displays Multi-Channel Television SoundPress DISC/MENU to remove the menu Multi-Channel Television Sound cont’dPlease see additional notes on Hi-Fi StereoPress o or p to select Audio OUT Then, press B Press o or p to select HIFI. on will appear besideDVD Disc Menus Using the Title MenuPress TITLE. The Title menu will appear During playback, press FF g or REW h Fast Forward/Reverse SearchPress Play B to return to normal playback Specific Time Playback Press DVD to put the DVD/VCR in DVD modeTitle/Chapter Playback, Specific Time Playback Specific Title/Chapter PlaybackTrack Playback BA,BPress DVD Paused and Step-by-Step Playback, ResumePaused and Step-by-Step Playback ResumeRepeat Repeat, A-B RepeatMarkers During playback, press Angle to select a different SubtitlesCamera Angles During playback, press Subtitle to select a subtiPress B to select CUSTOM, then press OK Parental Controls PasswordPress Setup Power failure will not erase your passwordPress o or p to select Parental LEVEL, then PasswordPress DVD to put the DVD/VCR in DVD mode. Press the Number buttons to enter your four-digitAudio Language Stereo Sound ModeExample English audio Slow Motion DVD Slow Motion, ZoomZoom You cannot alter a Program dur- ing playback Programmed PlaybackProgram can have a maximum of 99 Tracks Random screen appears While playback is stopped, press Mode twice soRandom Playback Red DVD light will appearJpeg Files have the icon 62 MP3/JPEG PlaybackOr OK To stop playback, press Stop COr, the following may appear to indicate Repeat play MP3/JPEG DisplaysPress Display again to remove the display Press Or B to select display, then press OK When playback is stopped, press SETUP.Quick Setup screen will appear DisplayDisplay cont’d Press Setup to remove the menusLanguage Language Codes Language cont’dPress o or p to select a language, then press Audio While playback is stopped, press SETUP.Press Display repeatedly to see the following dis On-Screen DisplaysPlays during DVD playback Virtual Surround Press DVD to put the DVD/VCR in DVD modeBlack Level, Virtual Surround Black LevelCare and Maintenance Cable Box/DBS Output Channel 03 or GlossarySpecifications Helpful Hints DVD/VCR has no powerRemote control will not operate the DVD/VCR There is no picture in DVD modeHelpful Hints cont’d Number buttons won’t work for TV channels above Power FailureVCR will not perform a timer recording VCR will not record a TV programYou cannot remove the tape Line Input modeCleaning the Video Heads You cannot insert a video cassetteMagnavox, P.O. Box 520890, Miami, FL 33152 402 Limited WarrantyPayment, if applicable Limited Warranty cont’dTo obtain a replacement product from Magnavox Exchange Fee + Sales Tax = TotalControls Information Index