JVC HR-XVC29SU manual Audio is played back with channels other than Dolby Digital, Playback discs

Page 63

						EN 63

8 D. RANGE COMPRESSION		You can compress the dynamic range (the difference between the loudest and
AUTO		quietest audio signals) of the sound when listening to the sound at a low
ON		volume or at night.
		This function is available with DVD VIDEO discs recorded with the Dolby
		Digital format. Set to the appropriate mode according to the number of
		channels recorded.
		AUTO:	Audio is played back with channels other than Dolby Digital
		ON:	channel 1 or 2 compressed.
		ON:	Audio is played back with all channel compressed.


Playback discs				Output

		STREAM/PCM		DOLBY DIGITAL/PCM		PCM ONLY
		STREAM/PCM		DOLBY DIGITAL/PCM		PCM ONLY

DVD VIDEO with
48 kHz, 16/20/24 bit linear				48 kHz, 16 bit linear PCM
PCM

DVD VIDEO with DTS		DTS bitstream		44.1 kHz, 16 bit stereo linear PCM

DVD VIDEO with Dolby		Dolby Digital bitstream				48 kHz, 16 bit stereo linear
Digital		Dolby Digital bitstream				PCM
Digital						PCM

Audio CD/Video CD			44.1 kHz, 16 bit stereo linear PCM

Audio CD with DTS		DTS bitstream		44.1 kHz, 16 bit stereo linear PCM

NOTES:

●The unit is not equipped with the DTS 5.1 channel decoding function.

●When you play back a DVD VIDEO or Audio CD disc with DTS, use a DTS decoder to get correct signals from your speakers. Never use the unit’s analog output connectors, which output incorrect signals that may damage your speakers.

●If you connect the analog outputs and digital outputs simultaneously, be sure to select the source of the amplifier correctly, or set the level control of the amplifier connected to the analog outputs to minimum.

Image 63

Contents For Customer Use HR-XVC29SUDeclaration of Conformity Dear CustomerGrounding or Polarization Power SourcesPower Cord Protection Power LinesBefore YOU Install Your NEW Unit On placing the unit Do not place the unitDo not block the unit’s ventilation openings or holes To mobile phone usersAbout Discs DVD deck only Scan Mode Set DVD deck onlyRemote Control Functions Mode Set VCR deck Mode Set DVD deck Child LockRegion Number About DiscsPlayable Discs Unplayable DiscsFile Structure of Discs Placing a DiscCare and Handling of Discs J K L M N O P Front View10 EN Rear ViewFront Display Panel On the tape Shows you where you are BeginningOn-Screen Display VCR deck To recall an indicationOne Touch Replay Button pg , 42 m Skip Search Button pg How To Use12 EN RemoteConnect the unit to TV Check the contentsConnect the unit to power source Situate the unitSet the VCR channel to off 8To connect to a TV with component video input connectors14 EN DVD deck onlySelect the DVD deck Scan Mode SetSwitch the mode Turn on the unit16 EN Perform Plug & Play setupWhat to do if Plug & Play setting failed Plug & Play SetDVD deck Select the modeSelect the mode setting Monitor Set18 EN LanguageAccess the DVD Set Up menu screen Hightlight to on ScreenLANGUAGE, then press 20 EN On the DVD Set Up menu screen as an exampleProcedure shows how to set Menu Language See Language Code List pgLanguage Code List Preparations Access the Clock Set screenClock Set 22 ENManual Clock Set Semiauto Clock SetAuto Channel Set Access the Tuner Set screenTuner Set 24 ENTo add channels Access the Manual Channel Set screenManual Channel Set Add or skip the desired channels26 EN Basic PlaybackActivate frame-by-frame playback Slow MotionVariable Speed Search Pause during playbackInstant ReView 28 ENSkip Search Index SearchActivate Repeat Playback Next Function MemoryRepeat Playback One Touch ReplaySoundtrack Selection Adjust the tracking manually30 EN Manual TrackingPause/Resume recording Choose a programSet the tape speed Start recordingRecord One Program While Watching Another Instant Timer Recording ITREngage the ITR mode 32 ENSet the counter display Reset the counterTape Remaining Time Second Audio RecordingEnter the program stop time Access the Program screen34 EN Enter the program start timeCable Box or DBS Receiver Users Engage the unit’s timer modeTo Timer-Record Weekly Or Daily Serials Enter the channel positionPress PROG. Check again Disengage the timer mode36 EN Press PROG. CheckPress Timer To cancel or change a programCancel or change a program Return to the timer modeSelect the program to modify Cancel or change program setting38 EN Confirm the overlapping programsSatellite Auto Recording You can also connect the cable box if it has a timerPress 8 Stop 40 ENLoad the disc Pause playbackLocating the Start Point of the Item or Skip the Item Locating a desired scene using the DVD menuAccess the DVD menu Access the PBC menu42 EN ZoomingActivate frame-by-frame playback Select menu item Access the repeat modeSelect the repeat mode Access the on-screen bar44 EN Time SearchSubtitle Selection Svcd Select the audio settingAngle Selection Select the view angleVFP function Adjusting the picture quality 46 ENSound Effect Select menu item How to Access the On-Screen BarAccess the status bar Access the menu barMenu Bar Functions for SVCD/Video CD/Audio CD 48 ENFor making your own disc PrecautionsOutline Control display About files and folders groups on the discPlay 50 ENBasic Playback Select the groupTo return to the control display Group/File SelectionZooming a still picture To start playback by specifying the group/file number52 EN Edit From a CamcorderStart the source player Set the input mode of recording deckEngage the Record Pause mode of the recording deck Another Video RecorderDubbing 54 ENFrom DVD to VCR For the digital audio device Digital Audio DubbingPlace a disc and load a MD Prepare the audio device for dubbing56 EN Make connections VCR deck Mode SetAccess the Function Set screen 58 ENFor Example 60 EN When this function is set to onPress rt to select ON, then press Enter For each mode setting, see corresponding pagesLanguage Picture Audio Others Back to the beginning Press rt to move the hightlight to RESUME, then press EnterPicture Settings Audio Settings62 EN Audio CD/Video CD Audio is played back with channels other than Dolby DigitalPlayback discs DigitalSet the Child Lock Others SettingsChild Lock 64 ENOn the Remote On the unitLights up on the front display panel DVD indicator lights up on the frontPress DVD so that the DVD indicator 66 ENRecording cannot be started There is no cassette loaded, or Jpeg Files Playback DVD deck68 EN To lock the disc tray VHS indicator disappears fromTray Lock Select a different host channel duringPlayback 70 ENSignal system Signal-to-noise ratio 45 dBHorizontal resolution Input/Output RCA connectors X 1, OUT x72 EN Still Picture/Frame-By-Frame Playback Scan Mode Set DVD deck onlyWhen programs overlap each other Zooming74 EN Page HR-XVC29SU