JVC HR-XVC29SU manual 38 EN, Confirm the overlapping programs, Select the program to modify

Page 38

38 EN

OPERATIONS ON VCR DECK (cont.)

Slide to the right.

	DAILY
	WEEKLY
CANCEL	DATE +/–
START +/–	CH +/–
STOP +/–
PROG
SP/EP
	ENTER

ATTENTION

If there is a conflict in the timer schedule and one program overlaps with another, only the parts shown below in gray will be recorded.

Pattern 1: The program with the lower program number will be recorded.

Program 1	CH10
Program 2
	CH40		Not recorded
	CH40		Not recorded

Pattern 2: The program starting earlier will be recorded.

Program 1

CH10

Program 2 CH40 Not recorded

Pattern 3: The program starting earlier will be recorded, followed by the remaining portion of the other program.

Program 1

CH10

Program 2

CH40

Not recorded

When programs overlap each other

If “PROGRAM NOT COMPLETED PROGRAM OVERLAP” appears, you have another program overlapping the program you have just made.

The Program Check screen appears and conflicting programs will start blinking.

Example: Program 1 (you have just made) and Program 4 overlap each other.

A Confirm the overlapping programs.

Overlapping programs blink on the TV screen.

B Select the program to modify.

Press rt, then press ENTER or e.

●You can only select one of the overlapping programs.

NOTE:

If you do not mind this overlap, press PROG to finish the timer program setting. The program with the lower program number will be recorded and the other one will not be recorded correctly. If no changes are made for approximately 1 minute, the unit will return to the normal screen.

C Cancel or change program setting.

To cancel a program, press CANCEL when the Program screen you do not want is shown. “PROGRAM COMPLETED” appears on the TV screen for about

5 seconds, then the normal screen appears.

To change a program, press the appropriate button: START +/–, STOP +/–, DATE +/–, CH +/–, DAILY (number key “8”), WEEKLY (number key “9”) and/or SP/ EP when the Program screen on which you want to make changes is shown, then press ENTER. “PROGRAM COMPLETED” appears on the TV screen for about

5 seconds, then the normal screen appears.

NOTE:

If the overlap is not yet solved, or another overlap occurs with the timer program setting after making the last correction on a program, the conflicting programs will be shown on the Program Check screen again. Repeat the above steps again until the overlap is solved.

Image 38

Contents HR-XVC29SU For Customer UseDear Customer Declaration of ConformityPower Lines Power SourcesPower Cord Protection Grounding or PolarizationBefore YOU Install Your NEW Unit To mobile phone users Do not place the unitDo not block the unit’s ventilation openings or holes On placing the unitMode Set VCR deck Mode Set DVD deck Child Lock DVD deck only Scan Mode Set DVD deck onlyRemote Control Functions About DiscsUnplayable Discs About DiscsPlayable Discs Region NumberCare and Handling of Discs File Structure of DiscsPlacing a Disc Front View J K L M N O PFront Display Panel 10 ENRear View To recall an indication Shows you where you are BeginningOn-Screen Display VCR deck On the tapeRemote How To Use12 EN One Touch Replay Button pg , 42 m Skip Search Button pgSituate the unit Check the contentsConnect the unit to power source Connect the unit to TVDVD deck only 8To connect to a TV with component video input connectors14 EN Set the VCR channel to offTurn on the unit Scan Mode SetSwitch the mode Select the DVD deckPlug & Play Set Perform Plug & Play setupWhat to do if Plug & Play setting failed 16 ENMonitor Set Select the modeSelect the mode setting DVD deckLanguage 18 ENLANGUAGE, then press Access the DVD Set Up menu screenHightlight to on Screen See Language Code List pg On the DVD Set Up menu screen as an exampleProcedure shows how to set Menu Language 20 ENLanguage Code List 22 EN Access the Clock Set screenClock Set PreparationsSemiauto Clock Set Manual Clock Set24 EN Access the Tuner Set screenTuner Set Auto Channel SetAdd or skip the desired channels Access the Manual Channel Set screenManual Channel Set To add channelsBasic Playback 26 ENPause during playback Slow MotionVariable Speed Search Activate frame-by-frame playbackIndex Search 28 ENSkip Search Instant ReViewOne Touch Replay Next Function MemoryRepeat Playback Activate Repeat PlaybackManual Tracking Adjust the tracking manually30 EN Soundtrack SelectionStart recording Choose a programSet the tape speed Pause/Resume recording32 EN Instant Timer Recording ITREngage the ITR mode Record One Program While Watching AnotherSecond Audio Recording Reset the counterTape Remaining Time Set the counter displayEnter the program start time Access the Program screen34 EN Enter the program stop time Enter the channel position Engage the unit’s timer mode To Timer-Record Weekly Or Daily Serials Cable Box or DBS Receiver UsersPress PROG. Check Disengage the timer mode36 EN Press PROG. Check againReturn to the timer mode To cancel or change a programCancel or change a program Press TimerConfirm the overlapping programs Cancel or change program setting38 EN Select the program to modifyYou can also connect the cable box if it has a timer Satellite Auto RecordingPause playback 40 ENLoad the disc Press 8 StopAccess the PBC menu Locating a desired scene using the DVD menuAccess the DVD menu Locating the Start Point of the Item or Skip the ItemActivate frame-by-frame playback 42 ENZooming Access the on-screen bar Access the repeat modeSelect the repeat mode Select menu itemSubtitle Selection 44 ENTime Search Select the view angle Select the audio settingAngle Selection SvcdSound Effect VFP function Adjusting the picture quality46 EN Access the menu bar How to Access the On-Screen BarAccess the status bar Select menu item48 EN Menu Bar Functions for SVCD/Video CD/Audio CDAbout files and folders groups on the disc PrecautionsOutline Control display For making your own discSelect the group 50 ENBasic Playback PlayTo start playback by specifying the group/file number Group/File SelectionZooming a still picture To return to the control displayEdit From a Camcorder 52 ENAnother Video Recorder Set the input mode of recording deckEngage the Record Pause mode of the recording deck Start the source playerFrom DVD to VCR Dubbing54 EN Prepare the audio device for dubbing Digital Audio DubbingPlace a disc and load a MD For the digital audio device56 EN Make connections 58 EN Mode SetAccess the Function Set screen VCR deckFor Example When this function is set to on 60 ENPress rt to move the hightlight to RESUME, then press Enter For each mode setting, see corresponding pagesLanguage Picture Audio Others Back to the beginning Press rt to select ON, then press Enter62 EN Picture SettingsAudio Settings Digital Audio is played back with channels other than Dolby DigitalPlayback discs Audio CD/Video CD64 EN Others SettingsChild Lock Set the Child LockOn the unit On the Remote66 EN DVD indicator lights up on the frontPress DVD so that the DVD indicator Lights up on the front display panelJpeg Files Playback DVD deck Recording cannot be started There is no cassette loaded, or68 EN Select a different host channel during VHS indicator disappears fromTray Lock To lock the disc tray70 EN PlaybackInput/Output RCA connectors X 1, OUT x Signal-to-noise ratio 45 dBHorizontal resolution Signal system72 EN Zooming Scan Mode Set DVD deck onlyWhen programs overlap each other Still Picture/Frame-By-Frame Playback74 EN Page HR-XVC29SU