JVC HR-XVC29SU manual Tape Remaining Time, Second Audio Recording, Set the counter display

Page 33

EN 33

Slide to the right.

C.RESET

ON SCREEN

DISPLAY

Elapsed Recording Time Indication

1Set the counter display.

Press DISPLAY until a counter reading appears on the front display panel.

2Reset the counter.

Press C.RESET before starting recording or playback.

●The counter is reset to “0:00:00” and shows the exact elapsed time as the tape runs. You can check the exact time of a recording or playback.

Tape Remaining Time

Press DISPLAY until the time remaining on the tape appears.

●The front display panel shows the tape remaining time with “:” blinking.

●By pressing the DISPLAY button, you can change display to show the channel position*, clock time, counter reading or tape remaining time.

*Channel position is not displayed during playback.

NOTES:

●When you press ON SCREEN, the on-screen display appears on the TV screen for 5 seconds, then the displays other than the counter disappears. To clear the counter display, press ON SCREEN.

●Depending on the type of tape being used, the tape remaining time reading may not appear right away, or is not correct.

“– –:– –” may sometimes appear with “:” blinking, or the display may blink on occasion.

Second Audio Recording

This unit’s built-in MTS decoder enables reception of Multichannel TV Sound broadcast. To record a SAP program received, set “2ND AUDIO RECORD” to “ON.” ( pg. 60)

NOTE:

When the channel is changed on the unit;

●The “STEREO” indicator appears on the screen for about 5 seconds if the program is a stereo broadcast.

●The “SAP” indicator appears on the screen for about 5 seconds if the program is a SAP broadcast.

●Both indicators appear when a stereo program is accompanied by SAP sound.

Image 33

Contents For Customer Use HR-XVC29SUDeclaration of Conformity Dear CustomerPower Cord Protection Power SourcesPower Lines Grounding or PolarizationBefore YOU Install Your NEW Unit Do not block the unit’s ventilation openings or holes Do not place the unitTo mobile phone users On placing the unitRemote Control Functions DVD deck only Scan Mode Set DVD deck onlyMode Set VCR deck Mode Set DVD deck Child Lock About DiscsPlayable Discs About DiscsUnplayable Discs Region NumberFile Structure of Discs Placing a DiscCare and Handling of Discs J K L M N O P Front View10 EN Rear ViewFront Display Panel On-Screen Display VCR deck Shows you where you are BeginningTo recall an indication On the tape12 EN How To UseRemote One Touch Replay Button pg , 42 m Skip Search Button pgConnect the unit to power source Check the contentsSituate the unit Connect the unit to TV14 EN 8To connect to a TV with component video input connectorsDVD deck only Set the VCR channel to offSwitch the mode Scan Mode SetTurn on the unit Select the DVD deckWhat to do if Plug & Play setting failed Perform Plug & Play setupPlug & Play Set 16 ENSelect the mode setting Select the modeMonitor Set DVD deck18 EN LanguageAccess the DVD Set Up menu screen Hightlight to on ScreenLANGUAGE, then press Procedure shows how to set Menu Language On the DVD Set Up menu screen as an exampleSee Language Code List pg 20 ENLanguage Code List Clock Set Access the Clock Set screen22 EN PreparationsManual Clock Set Semiauto Clock SetTuner Set Access the Tuner Set screen24 EN Auto Channel SetManual Channel Set Access the Manual Channel Set screenAdd or skip the desired channels To add channels26 EN Basic PlaybackVariable Speed Search Slow MotionPause during playback Activate frame-by-frame playbackSkip Search 28 ENIndex Search Instant ReViewRepeat Playback Next Function MemoryOne Touch Replay Activate Repeat Playback30 EN Adjust the tracking manuallyManual Tracking Soundtrack SelectionSet the tape speed Choose a programStart recording Pause/Resume recordingEngage the ITR mode Instant Timer Recording ITR32 EN Record One Program While Watching AnotherTape Remaining Time Reset the counterSecond Audio Recording Set the counter display34 EN Access the Program screenEnter the program start time Enter the program stop timeTo Timer-Record Weekly Or Daily Serials Engage the unit’s timer modeEnter the channel position Cable Box or DBS Receiver Users36 EN Disengage the timer modePress PROG. Check Press PROG. Check againCancel or change a program To cancel or change a programReturn to the timer mode Press Timer38 EN Cancel or change program settingConfirm the overlapping programs Select the program to modifySatellite Auto Recording You can also connect the cable box if it has a timerLoad the disc 40 ENPause playback Press 8 StopAccess the DVD menu Locating a desired scene using the DVD menuAccess the PBC menu Locating the Start Point of the Item or Skip the Item42 EN ZoomingActivate frame-by-frame playback Select the repeat mode Access the repeat modeAccess the on-screen bar Select menu item44 EN Time SearchSubtitle Selection Angle Selection Select the audio settingSelect the view angle SvcdVFP function Adjusting the picture quality 46 ENSound Effect Access the status bar How to Access the On-Screen BarAccess the menu bar Select menu itemMenu Bar Functions for SVCD/Video CD/Audio CD 48 ENOutline Control display PrecautionsAbout files and folders groups on the disc For making your own discBasic Playback 50 ENSelect the group PlayZooming a still picture Group/File SelectionTo start playback by specifying the group/file number To return to the control display52 EN Edit From a CamcorderEngage the Record Pause mode of the recording deck Set the input mode of recording deckAnother Video Recorder Start the source playerDubbing 54 ENFrom DVD to VCR Place a disc and load a MD Digital Audio DubbingPrepare the audio device for dubbing For the digital audio device56 EN Make connections Access the Function Set screen Mode Set58 EN VCR deckFor Example 60 EN When this function is set to onLanguage Picture Audio Others Back to the beginning For each mode setting, see corresponding pagesPress rt to move the hightlight to RESUME, then press Enter Press rt to select ON, then press EnterPicture Settings Audio Settings62 EN Playback discs Audio is played back with channels other than Dolby DigitalDigital Audio CD/Video CDChild Lock Others Settings64 EN Set the Child LockOn the Remote On the unitPress DVD so that the DVD indicator DVD indicator lights up on the front66 EN Lights up on the front display panelRecording cannot be started There is no cassette loaded, or Jpeg Files Playback DVD deck68 EN Tray Lock VHS indicator disappears fromSelect a different host channel during To lock the disc trayPlayback 70 ENHorizontal resolution Signal-to-noise ratio 45 dBInput/Output RCA connectors X 1, OUT x Signal system72 EN When programs overlap each other Scan Mode Set DVD deck onlyZooming Still Picture/Frame-By-Frame Playback74 EN Page HR-XVC29SU