JVC HR-XVC29SU manual 14 EN, DVD deck only, Set the VCR channel to off, Back of unit

Page 14

14 EN

INSTALLING YOUR NEW UNIT (cont.)

Component Video Connection

(DVD deck only)

ATTENTION

Be sure to connect the unit’s VIDEO OUTPUT (DVD/ VCR) connector to the TV’s VIDEO input connector.

Antenna or Cable

Coaxial cable

Flat feeder

Matching transformer (not supplied)

8To connect to a TV with component video input connectors . . .

A Connect the unit to TV.

AConnect the antenna, unit and TV as per “AV

Connection.” ( pg. 13)

BConnect the unit’s COMPONENT VIDEO OUT connectors to the TV’s component video input connectors.

B Connect the unit to power source.

Plug the end of the AC power cord into an AC outlet. This unit performs Plug & Play Set automatically. ( pg. 16)

●The clock and tuner channels will automatically be set when the antenna is connected and when the AC power cord is first connected to an AC outlet. (If “AUTO” and the channel indicator are displayed on the front display panel before the unit is powered on, the clock and tuner channels are being set automatically. Wait for the time to be displayed on the front display panel before turning on the unit.)

C Set the VCR channel to off.

Before performing the following steps:

AC outlet

AUDIO OUTPUT

● Make sure there is no cassette inserted in the unit.

● Make sure the unit is turned on, then press VCR/

DVD on the unit or VCR on the Remote so that the

VHS indicator lights up on the front display panel.

VIDEO OUTPUT

AC power cord COMPONENT VIDEO

OUT

Back of unit

 

 

VHF/UHF

 

 

IN

Component

Audio/Video

VHF/UHF

Video cable

cable

OUT

(not supplied)

(not supplied)

 

 

 

RF cable

 

 

(supplied)

To Component Video

To 75 ohm

Input connector

Terminal

 

TV

APress POWER to turn off the unit, then press 8 STOP on the unit for more than 5 seconds. “3 CH” appears on the front display panel.

BPress CH +/– on the Remote to select “– CH” (off), then press ENTER.

NOTES:

●You can obtain high-quality component video pictures.

●If your TV is not stereo-capable, use the unit’s AUDIO OUTPUT connectors to connect to an audio amplifier for Hi-Fi stereo sound reproduction.

●To operate the unit with your TV using the Component Video connection, set your TV to its AV mode. You can also use the TV/VCR button on the unit’s Remote to set JVC TV to the AV mode.

For switching the TV’s mode, refer to the instruction manual of your television.

●By using the component video connection, you can view the images in the progressive mode. For switching to the

progressive mode, refer to “Scan Mode Set (DVD deck only)” ( pg. 15).

Page 13 Page 15
Image 14
Page 13 Page 15
Contents HR-XVC29SU For Customer UseDear Customer Declaration of ConformityPower Lines Power SourcesPower Cord Protection Grounding or PolarizationBefore YOU Install Your NEW Unit To mobile phone users Do not place the unitDo not block the unit’s ventilation openings or holes On placing the unitMode Set VCR deck Mode Set DVD deck Child Lock DVD deck only Scan Mode Set DVD deck onlyRemote Control Functions About DiscsUnplayable Discs About DiscsPlayable Discs Region NumberCare and Handling of Discs File Structure of DiscsPlacing a Disc Front View J K L M N O PFront Display Panel 10 ENRear View To recall an indication Shows you where you are Beginning On-Screen Display VCR deck On the tapeRemote How To Use12 EN One Touch Replay Button  pg , 42 m Skip Search Button  pgSituate the unit Check the contentsConnect the unit to power source Connect the unit to TVDVD deck only 8To connect to a TV with component video input connectors14 EN Set the VCR channel to offTurn on the unit Scan Mode SetSwitch the mode Select the DVD deckPlug & Play Set Perform Plug & Play setupWhat to do if Plug & Play setting failed 16 ENMonitor Set Select the modeSelect the mode setting DVD deckLanguage 18 ENLANGUAGE, then press Access the DVD Set Up menu screenHightlight to on Screen See Language Code List  pg On the DVD Set Up menu screen as an exampleProcedure shows how to set Menu Language 20 ENLanguage Code List 22 EN Access the Clock Set screenClock Set PreparationsSemiauto Clock Set Manual Clock Set24 EN Access the Tuner Set screenTuner Set Auto Channel SetAdd or skip the desired channels Access the Manual Channel Set screenManual Channel Set To add channelsBasic Playback 26 ENPause during playback Slow MotionVariable Speed Search Activate frame-by-frame playbackIndex Search 28 ENSkip Search Instant ReViewOne Touch Replay Next Function MemoryRepeat Playback Activate Repeat PlaybackManual Tracking Adjust the tracking manually30 EN Soundtrack SelectionStart recording Choose a programSet the tape speed Pause/Resume recording32 EN Instant Timer Recording ITREngage the ITR mode Record One Program While Watching AnotherSecond Audio Recording Reset the counterTape Remaining Time Set the counter displayEnter the program start time Access the Program screen34 EN Enter the program stop timeEnter the channel position Engage the unit’s timer modeTo Timer-Record Weekly Or Daily Serials Cable Box or DBS Receiver UsersPress PROG. Check Disengage the timer mode36 EN Press PROG. Check againReturn to the timer mode To cancel or change a programCancel or change a program Press TimerConfirm the overlapping programs Cancel or change program setting38 EN Select the program to modifyYou can also connect the cable box if it has a timer Satellite Auto RecordingPause playback 40 ENLoad the disc Press 8 StopAccess the PBC menu Locating a desired scene using the DVD menuAccess the DVD menu Locating the Start Point of the Item or Skip the ItemActivate frame-by-frame playback 42 ENZooming Access the on-screen bar Access the repeat modeSelect the repeat mode Select menu itemSubtitle Selection 44 ENTime Search Select the view angle Select the audio settingAngle Selection SvcdSound Effect VFP function Adjusting the picture quality46 EN Access the menu bar How to Access the On-Screen BarAccess the status bar Select menu item48 EN Menu Bar Functions for SVCD/Video CD/Audio CDAbout files and folders groups on the disc PrecautionsOutline Control display For making your own discSelect the group 50 ENBasic Playback PlayTo start playback by specifying the group/file number Group/File SelectionZooming a still picture To return to the control displayEdit From a Camcorder 52 ENAnother Video Recorder Set the input mode of recording deckEngage the Record Pause mode of the recording deck Start the source playerFrom DVD to VCR Dubbing54 EN Prepare the audio device for dubbing Digital Audio DubbingPlace a disc and load a MD For the digital audio device56 EN Make connections 58 EN Mode SetAccess the Function Set screen VCR deckFor Example When this function is set to on 60 ENPress rt to move the hightlight to RESUME, then press Enter For each mode setting, see corresponding pagesLanguage Picture Audio Others Back to the beginning Press rt to select ON, then press Enter62 EN Picture SettingsAudio Settings Digital Audio is played back with channels other than Dolby DigitalPlayback discs Audio CD/Video CD64 EN Others SettingsChild Lock Set the Child LockOn the unit On the Remote66 EN DVD indicator lights up on the frontPress DVD so that the DVD indicator Lights up on the front display panelJpeg Files Playback DVD deck Recording cannot be started There is no cassette loaded, or68 EN Select a different host channel during VHS indicator disappears fromTray Lock To lock the disc tray70 EN PlaybackInput/Output RCA connectors X 1, OUT x Signal-to-noise ratio 45 dBHorizontal resolution Signal system72 EN Zooming Scan Mode Set DVD deck onlyWhen programs overlap each other Still Picture/Frame-By-Frame Playback74 EN Page HR-XVC29SU
Top Page Image Contents