Filename [XV48EX_EN_09Editing.fm] |
|
XV48EX_EN_01.book Page 50 Saturday, October 9, 2004 10:34 PM | Masterpage:Left0 |
50 EN |
|
| SYSTEM CONNECTIONS | |
Connecting to a Satellite | Perfect Connections | |||
This is an example of recommended connections if your | ||||
Receiver |
| |||
| Connect the decoder to the satellite receiver’s connector | |||
|
| TV has two | ||
Simple Connections |
| if you have a decoder, | ||
| connector, and | |||
This is an example of a simple connection if your TV has | satellite receiver’s connector. Then connect the satellite | |||
receiver and TV. |
| |||
one | Outdoor unit | Aerial | ||
Connect the satellite receiver to the | ||||
|
| |||
connector, then connect the | Satellite cable |
| ||
the TV’s connector. |
| TV aerial cable | ||
|
| |||
Outdoor unit | Aerial |
|
| |
| TV aerial cable | Satellite receiver |
| |
Satellite cable |
| ANTENNA IN | ||
Satellite receiver |
|
| ANTENNA OUT | |
|
|
| ||
| ANTENNA IN |
|
| |
| ANTENNA OUT |
|
|
Decoder
TV | TV |
IMPORTANT
When you set
●If you turn on the unit when the satellite receiver’s power is off, nothing appears on the TV screen. In this case, turn on the satellite receiver, or set the TV to its TV mode, or press TV/VCR on the remote control to set the unit to the video mode.
NOTES:
●Set “L-2 SELECT” to “A/V”. ( pg. 54)
●You can use the Automatic Satellite Programme Recording function ( pg. 28) with this connection. (VHS deck only)
●To record a programme via the satellite receiver, select
●To receive a scrambled broadcast, descramble the signal with the decoder connected to the satellite receiver.
●For details, refer to the instruction manual of the satellite receiver and decoder.
NOTES:
●Set “L-2 SELECT” to “A/V”. ( pg. 54)
●You can use the Automatic Satellite Programme Recording function ( pg. 28) with this connection. (VHS deck only)
●To record a programme via the satellite receiver, select
●For details, refer to the instruction manual of the satellite receiver.
Page 50
October 9, 2004 10:34 pm