JVC HR-XV1EU manual Setting the Time and Date

Setting the Time and Date

If the time and date is not be displayed for some reasons after the ATS function has been completed, a manual clock adjustment will be required.

Preparation:

•Turn ON the TV and set to the video input mode.

•Make sure TV/VCR/DVD switch has been slided to VCR/DVD.Then press VCR to select the VCR mode. (The VCR indicator will light)

Example: Setting the clock to 11:30, 23rd October 2002.

1

2

Press SET UP MENU. Press

or repeatedly until the dot before SYSTEM SETUP blinks. Then press OK. Then press

or repeatedly until the dot before CLOCK SET blinks. Then press OK.

Press / repeatedly or number keys until “23” appears. Then press .

SYSTEM SETUP

CLOCK SET

LANGUAGE/SPRACHE/LANGUE

AV2[DEC]

SELECT :

ENTER : OK

EXIT : MENU

CLOCK SET

DAY 23 WED

MONTH 1

YEAR 2002

TIME 0:00

AUTO TIME ON

SELECT :

SET : / 0–9

OK : OK EXIT : MENU

Note:

• In case of a power failure the clock will

continue to operate for another 30 min-

utes with quartz-controlled precision.To

3 Set the month, year, hour and minute in the same way as the step 2. Then press .

CLOCK SET

DAY 23 WED MONTH 10

YEAR 2002

TIME 11:30

AUTO TIME ON

SELECT :

SET : / 0–9

OK : OK EXIT : MENU

indicate that the power failure has lasted
for an excessive period of time “0:00” will
blink on the display. In this case read-
just time and date.
If the clock does not have been adjusted
yet, the step 1 will appear automatically.
• The clock will only be automatically set
when the VCR is connected to the
Telecom CATV network. All the provided
CATV stations should be stored in the
VCR. This is the case when the ATS
function has been completed. The an-
tenna system must be free of any de-
fects, e.g. there should be no picture
noise.The clock will be re-adjusted every
30 minutes except the period between
23:00 and 1:00 o’clock. In case the total
difference between the indicated time
and the current time is more than 5 min-
utes, the clock will not be corrected.The
switching from winter time to summer
time will be considered.
The clock will not be adjust automati-
cally when:
•	timer activated.
•	antenna not connected.
•	only an outdoor antenna or a satellite
	receiver connected.

4 Press or to select “ON” or “OFF”, then press OK. If “ON” is selected, any required time corrections will be performed automatically (see left). In this case the personnel of the appropriate TV station or of Telecom will be responsible for

correcting the time setting. If any	CLOCK SET
error occurs during such an
		DAY	23 WED
adjustment (e.g. switching from		MONTH	10
summer time to winter time), your		YEAR	2002
clock will show the incorrect time.		TIME	11:30
		AUTO TIME		ON
To set the correct time select	SELECT :
“OFF” and follow the procedure
	SET	:		EXIT : MENU
described above.	OK	: OK

•In case of an erroneous input press to go back to before step and enter again.

5 Press SET UP MENU repeatedly until the TV picture appears on the screen.

6 The clock will begin operation and the colon will blink on the VCR display.

VCR

19