JVC HR-XV1EU manual Remote control, How to install the batteries, Battery precautions, Dvd/Vcr

Page 9

 

 

Remote control

How to install the batteries

 

 

Use micro batteries type R6.

 

 

1 Open the battery compart-

2 Install two "AA" batteries (not

3 Replace the compartment

ment cover in the direction of

supplied), paying attention to the

cover.

the arrow.

polarity diagram in the battery

 

 

compartment.

 

Battery precautions

The precautions below should be followed when using batteries in this device:

1.Use only the size and type of batteries specified.

2.Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed batteries may cause damage to the device. To avoid a potential short circuit, insert the “–” end first.

3.Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh ones.

4.If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.

5.Do not try to recharge batteries not intended to be recharged; they can overheat and rupture.

Distance of Remote

Control Operation

approx.

5m

Effective angle: approx. 60°

Point the remote control directly at the remote sensor.

Change the custom code for remote control

If you operate this DVD/VCR with another JVC’s VCR simultaneously arranging them side by side, the both recorders will react to this remote control. In this case, you can change the remote control and DVD/VCR to other frequency (“ ”). Then you can operate only this DVD/VCR with this changed remote control.

When you purchased, the DVD/VCR and remote control have been set to the frequency-“ ”.

Example: Change frequency to

Remote control:

While holding VCR, press 2 (code: b) of Number keys.

(in case of code: A, press 1). Then press OK.

DVD/VCR:

In the POWER off mode, press and hold PLAY for more than 5 seconds. The current code (“A” or “b”) will appear on the display. Then press 3 on the remote control. The current code of the remote control will be transmitted to the unit and the unit will be adjusted to the transmitted code. Then the code will disappear after approx. 4 seconds.

NOTE:

•If the remote control has been set to b, the DVD/VCR also must be set to b. Otherwise, the DVD/VCR can not be operated with this remote control.

•To reset to “A”, repeat above procedure. However press 1 instead of 2.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Digital Video Cassette Recorder USER’S GuideUse only discs marked with the following Safety PrecautionsDVD Video CDs/Audio CDsFor ItaIy Safety PrecautionsDo not block the recorder’s ventilation openings or holes Moisture CondensationVideo Cassette Recorder FeaturesContents Parts and functions FrontRear Display window DisplayJVC TV Remote Control Remote controlHow to install the batteries Remote controlBattery precautions Change the custom code for remote controlConnections and Installation Connect a TV with the Scart socketVCR/DECODER Connection to a Satellite Receiver Playback connectionConnect to a TV with S-Video Output Connection to a Decoder for Premiere ProgramsPlayback connection Connecting the optical digital cableConnect to a Stereo Amplifier with Audio Output Connect to an AV Amplifier with built-in digital surroundSetting the TV to the AV-Channel Which you must tune your TV-setYour television to this program position Press the button to turn on the DVD/VCR Setting the On-screen languageProcedure see If no channel setting is done Press SET UP MENU. PressTurn on the TV and set to the video input mode Canceling the skip functionSkipping unwanted TV stations Reassigning TV station positions SET UP MenuBe extracted to the first line Repeatedly until TV- station appearsChanging TV station names Change BroadcastName Setting the Time and Date Example Preset the SAT1 on program position Manual TV station presettingTo cancel the channel skipping Manual TV station presettingFine Tuning adjustment To skip a channel positionLoading and Unloading a Cassette Tape Cassette tape playback Forward/Reverse picture search modeTo stop playback To rewind the tape or forward it rapidlySpecial playback/Playback sharpness/Skip Search Special playbackPlayback sharpness Repeat Playback To cancel normal repeat modeNormal repeat playback Scene repeat playbackZero Return function Counter DisplayDISPLAY-button Stereo ZDFVideo Index Search System Index SearchRecording several Index Marks To Stop Recording Recording a TV ProgramTo Stop Recording Temporarily TapeRecording a TV Program Auto Rewind FeatureRecording with a Scart Cable To Display VCR operation StatusInstant Timer Recording ITR To Extend the Recording TimeTo stop the ITR To be to next SHOWVIEW-RecordingSHOWVIEW-Recording Setting a day of the weekChange the recording start-time Recording period extensionTimer-Recording Case of Timer progarms-overlapping Timer-RecordingConfirmation/Cancellation of the Timer Recording Timer Recording Special caseDetailed Description of the VPS/PDC Function Nicam stereo sound reception NICAM/German A2 Stereo Recording and PlaybackNicam programmes are divided into 4 types as shown below To record Nicam programmes, select Nicam Auto as followsNICAM/German A2 Stereo Recording and Playback HiFi signal indicationGerman A2 stereo sound reception Stereo program indicationPress or to select VCR SETUP. Then press Audio MixingAudio MIX Connection with second Video recorder or Video camera Duplicating a Video TapeDuplicating a disc material onto a video tape Not supply Scart socketDisc Setup language can be selected Preparation Setting setup languagePress OPEN/CLOSE Playback procedureSpecial playback Zooming DVD Picture Signal Selection/ZoomingRepeat Playback Repeat PlaybackSome discs may not work with Memory playback Memory playback/Random playbackRandom playback Number keys toMP3 CD Information MP3 PlaybackLimitations on MP3 CD playback Limitations on displayChanging soundtrack language Cancel or OK buttonChanging Subtitles language Case of Video CD playbackChanging Angles Changing angles / Title selection / DVD menuTitle Selection DVD MenuParental control setting Parental controlDepending on the discs, the unit can- not limit playback Country/Area Parental controlTo change the parental lock level Follow steps 1Setting menu language English, French, GermanExample Press or to select Audio Language Setting audio soundtrack languageOK Enter Setting subtitle languagePress To select your Desired language, then press OK Enter No SubtitleSetting on Screen display Setting the aspect ratio of TV screenAudio Out Select Setting AudioDynamic Range Control Karaoke VocalPress SET UP Menu in the stop mode Setting OperationPause/Still Title StopSetting Screen Saver DVD only Setting BackgroundSelecting the sound enhancement E.A.M To exit the audio enhancement selection PressSetting initial setup/output sound conversion table You can install the initial system setting PreparationPCM Audio Status display of DiscVideo CD OFFTable of languages Problems and troubleshooting Symptoms Possible Solutions DVD/VCRVCR Video head cleaning Problems and troubleshooting / Video head cleaningSymptoms Possible Solutions Video head cloggingAccessories SpecificationsGeneral VCR section

HR-XV1EU specifications

The JVC HR-XV1EU is a sophisticated home video recorder that stands out for its remarkable blend of functionality, advanced technologies, and user-friendly design. Launched as part of JVC’s esteemed HR series, the HR-XV1EU combines both VHS and DVD recording capabilities, making it a versatile choice for those looking to digitize their media collection and enjoy high-quality playback.

Key features of the HR-XV1EU include its dual-format recording system that allows users to record directly onto VHS tapes or DVDs, providing flexibility for various viewing preferences. The device supports a wide range of video formats, including standard VHS as well as DVD+R and DVD-R discs, facilitating seamless playback across different platforms.

One of the standout technologies integrated into the HR-XV1EU is the Digital Auto Tracking system, which enhances the clarity and stability of recordings. This technology automatically adjusts playback and recording heads to ensure optimal tracking, minimizing the risk of tape deterioration over time. Additionally, the device boasts a built-in Time Base Corrector, which is essential for refining video output and eliminating disturbances from signal interruptions.

The HR-XV1EU is equipped with a progressive scan feature, which provides smoother video playback and improved picture quality. This feature becomes particularly valuable when viewing films or any dynamic content, enhancing the overall user experience. Furthermore, the VCR incorporates an on-screen menu for easy navigation, allowing users to access functions and settings with ease.

Another notable aspect of the HR-XV1EU is its connectivity options. It features multiple input and output ports, including HDMI, SCART, and composite video connections. This extensive range of connectivity allows users to connect the VCR to televisions, camcorders, and other external devices effortlessly.

In terms of design, the compact form factor of the HR-XV1EU enables it to fit snugly into any entertainment setup. The ergonomic layout of the control buttons and the intuitive interface contribute to ease of use, ensuring that both tech-savvy individuals and novices can operate the device effectively.

In conclusion, the JVC HR-XV1EU is an exceptional video recorder that encapsulates the essence of reliable home entertainment technology. With its dual-format recording capabilities, advanced image processing features, and diverse connectivity options, it provides users with a practical and high-quality solution for preserving and enhancing their video content. Whether you're looking to archive family memories or enjoy a casual film night, the HR-XV1EU delivers on all fronts, making it a worthy addition to any media setup.
Top Page Image Contents