JVC HR-XV1EU manual Repeat Playback, Normal repeat playback, Scene repeat playback

Repeat Playback

NOTE:

If the unit is turned off or starts record- ing, the repeat mode is canceled.

Normal repeat playback

The entire video tape will be played until its end. The tape will then automatically rewind to the beginning and the playback will be repeated.

1 Press SET UP MENU. Press or to select VCR EXTENSION. Then press OK.

2 Press	or	to select AUTO REPEAT.
3 Then press OK to select [ON] or			VCR EXTENSION
[OFF].				AUTO REPEAT		[ON]
If [ON] is selected, the playback
				SCENE REPEAT
will be repeated endlessly.
			SELECT : /
			ENTER		: OK
			EXIT		: MENU

4 Press SET UP MENU until the menu screen is cleared.

5 To start the playback, press .

The playback will be repeated endlessly.

To cancel normal repeat mode:

Follow the above step 3, then press OK to select the OFF position. Press SET UP MENU to return to the TV.

Scene repeat playback

1 Press SET UP MENU.
Press	or	to select VCR EXTENSION. Then press OK.
2 Press	or	to select SCENE	VCR EXTENSION
REPEAT. Then press OK.				AUTO REPEAT		[OFF]
The playback starts automatically.				SCENE REPEAT
			SELECT :
			ENTER		: OK
			EXIT		: MENU
3 Press OK at the point you want to						S – REPEAT
start scene repeat play-back.
S–REPEAT will blink on the
screen.
Press OK once again at the point
4 you want to end scene repeat						SR – R
playback.
SR–R will appear on the screen
and the tape will be rewinded
automatically to go back to the
starting point.
5 When the starting point was						SR – PLAY
found,	the	Scene repeat-play-

back will start automatically. SR-PLAY will appear only once.

To stop Scene repeat playback:

Press 3.

25