GoVideo VR3930 user manual Connections Connecting a TV

Connections (Continued)

Connecting a TV

Choose one of the following TV connections, depending on the capabilities of your equipment.

ote

All video signals are available from all video out- puts. That means that whichever TV connection you use, it will work with all input sources, including VHS out of the Component/Progressive Video Output.

RF Coaxial Connection

Connect the RF OUT (TO TV) jack on the DVD Recorder+VCR to the antenna in jack on your TV using the supplied 75-ohm coaxial cable (R). If you use this connection, tune your TV to the DVD Recorder+VCR’s RF output channel (CH 3 or 4).

How to set the DVD Recorder+VCR’s RF output channel

Turn off the DVD Recorder+VCR, then press and hold CH (v/V) on the front panel for about five seconds to change the RF output channel (CH 03 or

CH 04). “RF 03” or “RF 04” appears on the front panel display.

Audio/Video Connection

1Recorder+VCR to the video in jack on your TV using the supplied video cable (V).Connect the VIDEO OUT jack on the DVD

2the DVD Recorder+VCR to the left/right audio in

jacks on your TV using the supplied audio cables

(A).Connect the Left and Right AUDIO OUT jacks from

Rear of TV

ANTENNA	S-VIDEO	VIDEO	AUDIO INPUT		COMPONENT/PROGRESSIVE VIDEO INPUT
INPUT	INPUT	INPUT
			L	R	Pr	Pb	Y

R SV AC

				DVD + VCR OUT
		AV 1	AV	COMPONENT/	AUDIO
		IN	OUT	PROGRESSIVE	OUT
IN				VIDEO OUT
(FROM ANT.)
		R	R	Pr	R
RF		S-VIDEO OUT
OUT		L	L	Pb	L
					DIGITAL
(TO TV)	DIGITAL
					AUDIO
	AUDIO OUT				OUT
	OPTICAL	VIDEO	VIDEO	Y	COAXIAL

Rear of DVD Recorder+VCR

S-Video Connection

1Recorder+VCR to the S-Video in jack on your TV using an S-Video cable (S).Connect the S-VIDEO OUT jack on the DVD

2the DVD Recorder+VCR to the left/right audio in

jacks on your TV using the supplied audio cables

(A).Connect the Left and Right AUDIO OUT jacks from

Component Video Connection

1VIDEO OUT jacks on the DVD Recorder+VCR to

the corresponding in jacks on your TV using a Y Pb Pr cable (C).Connect the COMPONENT/PROGRESSIVE

2the DVD Recorder+VCR to the left/right audio in

jacks on your TV using the supplied audio cables

(A).Connect the Left and Right AUDIO OUT jacks from

Progressive Scan Connection

If your television is a high-definition or “digital ready” television, you may take advantage of the DVD Recorder+VCR’s Progressive Scan output for the highest video resolution possible.

If your TV does not accept the Progressive Scan for- mat, the picture will appear scrambled.

1VIDEO OUT jacks on the DVD Recorder+VCR to

the corresponding in jacks on your TV using an optional Y Pb Pr cable (C).Connect the COMPONENT/PROGRESSIVE

2the DVD Recorder+VCR to the left/right audio in

jacks on your TV using the supplied audio cables

(A).Connect the Left and Right AUDIO OUT jacks from

otes

–Be sure to set the Progressive Scan option to “ON” in the General menu; see page 20.

–Progressive Scan does not work with the RF, Audio/Video or S-Video connections.

CONNECTIONS & SETUP

15