GoVideo VR3930 user manual Initial Setup On-Screen Display Overview

Initial Setup (Continued)

On-Screen Display Overview

The On-Screen Display provides feedback on the status of the DVD Recorder+VCR and/or the currently loaded disc or tape. To access the On-Screen Display (or OSD), press the DISPLAY button.

Displaying Disc Information

To display information about the currently loaded disc or tape:

On-screen display operation

1	Press DISPLAY repeatedly to	display/change the
	information displayed on-screen.
2	To remove the on-screen display, press DIS-
	PLAY or RETURN (O) repeatedly until it disap-

pears.

See the descriptions on pages 28 and 29 for detailed explanations of on-screen displays for each media type.

otes

Some discs may not provide all the features shown in the on-screen display examples.

The on-screen display disappears automatically if no button is pressed for seven seconds.

Temporary Feedback Icons

Resume play from this point

Action prohibited or not available

Displaying TV Information

While watching TV, press DISPLAY to display/ remove the on-screen display.

For example, when a DVD-RW in VR mode is inserted, you would see a screen similar to the following:

Indicates disc type.				Indicates channel
Indicates Recording mode,				number and
					audio input
free space, and elapsed time
				signal received
		progress bar.
				by the tuner.
	DVD-VR			DVD
	VR Mode		SP 01H 32M Free	Ch. 6

MONO

Mono 10/8/2003 11:35 AM

Indicates audio output signal.

Indicates current date and time.

Changing TV Channels

If no disc is playing, you can change TV channels using the 0-9 or CH (+/-) buttons on the remote control or CH (v / V) buttons on the front panel.

ote

Antenna channels are numbered 2 through 69. Cable channels are numbered 1 through 125.

Changing TV Audio Channel

Some TV programs are broadcast with both a main and a Secondary Audio Program (SAP). You can change the TV audio using the AUDIO button.

Press AUDIO repeatedly to change the TV audio, according to Broadcast audio signal as shown below.

•STEREO+SAP Audio Signal Stereo → SAP → Mono → Stereo

•STEREO Audio Signal

Stereo → L → R → Mono → Stereo

•SAP Audio Signal Mono → SAP → Mono

•MONO Audio Signal Mono

The current audio channel is displayed on-screen.

•If SAP is selected, but there is no SAP channel being broadcast, you will still hear the main audio channel.

•If the sound is poor quality when set to Stereo, you can often improve it by changing to Mono.

•When an external input is selected, the audio channel can be switched only to Stereo.

CONNECTIONS & SETUP

27