GoVideo VR3930 Initial Setup Lock Settings, Movie Rating, Password, Changing the 4-digit code

Press SETUP.

The Setup menu appears.

Initial Setup (Continued)

LOCK Settings

Movie Rating

The Lock feature allows you to prevent DVDs from being played based on their ratings or to have certain discs played with alternative scenes.

Movie Rating	Unlock
Password	Level 8(Adult)
	Level 7
Country Code
	Level 6
	Level 5
	Level 4
	Level 3
	Level 2
	Level 1(Kid Safe)
Prev.	Select

1

2Use v / V to select the Lock option.

3 While the Lock option is selected, press B to move to the second level.

4Use v / V to select the Movie Rating option.

5Press B to move to the third level.

6Enter a 4-digit password using the 0-9 buttons. Enter the 4-digit password again to confirm.

When you have already entered a password; Enter your 4-digit password using the 0-9 buttons.When you have not entered a password yet.

ip

If you make a mistake before pressing ENTER, press b to back up and then re-enter your password.

7tons. One (1) has the most playback restric- tions. Eight (8) has the least playback restric- tions.

Unlock: If you select Unlock, the Lock feature is not active. The disc will play in full.

Level 1 to 8: Some discs contain scenes not suit- able for children. If you set a rating for the DVD Recorder+VCR, all scenes with the same rating or lower will be played. Higher rated scenes will not be played unless an alternative scene is available on the disc. The alternative must have the same rating or a lower one. If no suitable alternative is found, playback will stop. You must enter the 4-digit pass-

word or change the rating level in order to play the disc.Select a rating from 1 to 8 using the v / V but-

8 Press ENTER to confirm your rating selection, then press SETUP to exit the menu.

Password

Changing the 4-digit code

1Follow steps 1-3 as shown under Movie Rating.

2Use v / V to select the Password option.

3Press B to move to the third level.

4Follow step 6 as shown under Movie Rating.

5If you select “Delete” then press ENTER, the pass- word will be deleted.While “Change” is selected, press ENTER.

6Enter a 4-digit password using the 0-9 buttons.

7Enter the 4-digit password again.

ip

If you a mistake before pressing ENTER, press b to back up and then re-enter your password.

If you forget your 4-digit code

If you forget your password, follow the procedure below:

1Press SETUP to display the Setup menu.

2Use the 0-9 buttons to enter the 5-digit number “21019”. The following message appears on the TV screen: “Memorized password will be erased. Are you sure?”

3Select “Yes” then press ENTER. The 4-digit pass- word is cleared. Enter a new code as shown above.

Movie Rating
Password	Change
		New
Country Code	Delete	Password
		0-9 Input
	Prev.		Select

22