6 - Advanced Settings (cont.)
VCR Reception
Sets your desired audio signal when recording a TV show to the VCR deck.
1 Press SETUP.
2 Use / to select “Preferences.”
3 Use / to select “Audio,” then press
ENTER.
4 Use / to select “VCR Reception,” then press ENTER.
5 Use / to select your preferred audio
source for VCR recording, then press
ENTER.
• Stereo - Records the stereo signal.
• Mono - Records the mono signal.
• SAP - Records the Second Audio Program (often a second language).
6 Press SETUP to exit.
Tape Playback
Sets your desired audio signal for VHS tape playback.
1 Press SETUP.
2 Use / to select “Preferences.”
3 Use / to select “Audio,” then press
ENTER.
4 Use / to select “Tape Playback,” then press ENTER.
5 Use / to select your preferred audio track for VHS playback, then press ENTER.
•
• Linear - Plays the mono track.
• Mix - Plays both the
6 Press SETUP to exit.
Parental Controls
The Parental Controls feature allows you to block playback of DVDs based on their ratings.
Set Parental Level
Changes the Parental Control level.
1 Press SETUP.
2 Use / to select “Preferences.”
3 Use / to select “Parental Controls,” then press ENTER.
4 Use / to select “Set Parental Level,” then press ENTER.
Change Password
Current Code | _ _ _ _ |
Enter New Code | _ _ _ _ |
Confirm Code | _ _ _ _ |
Instructions |
|
|
5 Use the
• If this is the first time you have entered a password, you will be prompted to enter the “Current Code” before you can enter your own code. You MUST enter
• If you enter the incorrect password, you will not be able to set the Parental Level.
6 Use / to select the desired Parental Level
• Level 1 is the most restrictive, Level 8 is the least restrictive. Off allows all discs to play in full.
• Not all discs are rated.
7 Press SETUP to exit.
Change Password
Changes the Parental Control password.
1 Press SETUP.
2 Use / to select “Preferences.”
3 Use / to select “Parental Controls,” then press ENTER.
4 Use / to select “Change Password,” then press ENTER.
5 Use the
6 Use the
7 Use the
password, and then press ENTER.
8 Press SETUP to exit.
35