Connections Basic TV Connections | GoVideo DVR 4200, DVR 4250

Connections (Continued)

Basic TV Connections

Make one of the following connections, depending on the capabilities of your existing equipment.

Due to Macrovision encoding, you may not be able to view DVDs when connecting the DVD+VCR to a TV/VCR combination unit.

RF coaxial connection

Connect the RF OUT jack on the DVD+VCR to the antenna in jack on the TV using the 75-ohm Coaxial Cable supplied (R).

If you use this connection, tune the TV to the DVD+VCR’s RF output channel (CH 3 or 4).

How to set the DVD+VCR’s RF output channel

When the VCR is turned off, press and hold CH (v or V) on the front panel for about five seconds to toggle the RF output channel between CH 03 and CH 04. The “RF 03” or “RF 04” is displayed in the display window.

Audio/Video connection

1DVD+VCR to the video in jack on the TV using the video cable supplied (V).Connect the DVD/VHS VIDEO OUT jack on the

2 Connect the Left and Right DVD/VHS AUDIO OUT

jacks of the DVD+VCR to the audio left/right in jacks on the TV (A1) using the supplied audio cables.

Notes

If you use this connection, set the TV’s source selec- tor to VIDEO.

Rear of TV

AUDIO INPUT		VIDEO	ANTENNA
AUDIO INPUT		INPUT	INPUT
		INPUT	INPUT
L	R

A1 V R

Rear of DVD+VCR

Optional TV Connections

Notes

You can ONLY watch and listen to DVD playback through one of the following connections.

For using S-VIDEO OUT or COMPONENT VIDEO OUT jack, set the TV Output Select mode on the SETUP menu to corresponding mode. See page 19.

Audio/Video connection

Connect the VIDEO OUT jack on the DVD+VCR to

1 the video in jack on the TV using the video cable supplied (V).

2the DVD+VCR to the audio left/right in jacks on the TV (A2) using the supplied audio cables.Connect the Left and Right AUDIO OUT jacks of

S-Video connection

1to the S-Video in jack on the TV using the supplied S-Video cable (S).Connect the S-VIDEO OUT jack on the DVD+VCR

2the DVD+VCR to the audio left/right in jacks on the TV (A2) using the supplied audio cables.Connect the Left and Right AUDIO OUT jacks of

Component Video (Color Stream® ) connection

1the DVD+VCR to the corresponding in jacks on the TV using an optional Y Pb Pr cable (C).Connect the COMPONENT VIDEO OUT jacks on

2the DVD+VCR to the audio left/right in jacks on the TV (A2) using the supplied audio cables.Connect the Left and Right AUDIO OUT jacks of

Rear of TV

S-VIDEO	COMPONENT VIDEO INPUT			AUDIO INPUT		VIDEO
INPUT	COMPONENT VIDEO INPUT			AUDIO INPUT		INPUT
INPUT						INPUT
	Pr	Pb	Y	L	R	L

Rear of DVD+VCR

PREPARATION