Technical Specifications
General
Power requirements | AC 120V , 60 Hz |
Power consumption | 23W |
Dimensions (approx.) | 430 X 97.5 X 360 mm (16.9 x 3.9 x 14.2 inches) (w x h x d) |
Mass (approx.) | 5.4 kg (11.9 lbs) |
Operating temperature | 5˚C to 40˚C (41˚F to 104˚F) |
Operating humidity | 5 % to 90 % |
Signal system | NTSC |
Inputs
ANTENNA IN | Antenna or CATV input, 75 ohms |
VHS VIDEO IN | 1 |
VHS AUDIO IN | |
Outputs |
|
VIDEO OUT | 1 |
(Y) 1.0 V | |
| (C) 0.3 V |
COMPONENT VIDEO OUT | (Y) 1.0 V |
| (Pb)/(Pr) 0.7 V |
Audio output (digital audio) | 0.5 V |
Audio output (analog audio) | 2.0 Vrms (1 KHz, 0 dB), 330 ohms, RCA jack (L, R) x 1 |
RF OUT | Channel 3 or 4 |
VCR Specification
Head system | Four head helical scan azimuth system |
Timer | |
Tape speed | SP: 33.35 mm/sec, LP: 16.67 mm/sec, EP: 11.12 mm/sec |
Tape width | 12.7 mm |
Maximum recording time | SP: 2 HOURS |
Rewind time | About 3 minutes |
Antenna | 75 ohms (VHF/UHF) |
VHF output signal | Channel 3 or 4 (Switchable) |
Channel coverage | VHF: |
Frequency range | 20Hz to 20kHz |
More than 43dB | |
Dynamic range | More than 83 dB |
Channel separation | More than 55 dB |
DVD Specification
Laser system | Semiconductor laser, wavelength 650 nm |
Frequency response | DVD (PCM 96 kHz): 8 Hz to 44 kHz, DVD (PCM 48 kHz): 8 Hz to 22 kHz |
| CD: 8 Hz to 20 kHz |
More than 100dB (ANALOG OUT connectors only) | |
Harmonic distortion | Less than 0.008% |
Dynamic range | More than 95 dB (DVD/CD) |
Accessories:
Video cable x 1, Audio cable x 1, RF
Design and specifications are subject to change without notice.
REFERENCE
37