GoVideo DVR 4200, DVR 4250 manual Moisture Condensation

Troubleshooting (Continued)

Symptom	Cause	Correction
Some channels are	Those channels were deleted with the	Use ADD/DEL CH. to restore channels.
skipped over when	CH. ADD/DEL option.	See “Channel Selection” on page 16.
using CHv/V.			REFERENCE
Camcorder image is not	Camcorder is off.	Turn camcorder on and operate
Picture and sound of	Antenna or cables are loose.	Tighten connections or replace cable.
broadcasting channel
are weak or missing.	Wrong CHANNEL SOURCE option is	Try all CHANNEL SOURCE options.
	being used.	See “Channel Selection” on page 16 for
		details.
shown.		properly.
Camcorder image via	DVD+VCR SOURCE is not set to LINE.	Press INPUT to select LINE input chan-
A/V input to DVD+VCR		nel.
is not shown on TV
screen.
Timer recording is not	Clock in VCR is not set to correct time.	Set clock to correct time. See “Setting
possible.		the Clock” on page 17.
	VCR is on which disables timer.	Turn DVD+VCR off to enable timer.
		TIMER indicator light appears in the dis-
		play window.
	Timer has been programmed	Reprogram Timer. See “Timer
	incorrectly.	Recording” on page 23.
	TIMER indicator light does not appear	Reprogram Timer and turn DVD+VCR
	after programming timer.	off to enable timer.
TIMER indicator light	VCR is in Timer Recording mode.	This is the normal indication that the
appears after VCR is		VCR is in TIMER mode.
turned off.
Stereo Audio Record	TV is not Stereo-compatible.	No action is possible.
and/or Playback is not
	Broadcast program is not in stereo for-	No action is possible.
present.
	mat.
	DVD+VCR A/V Out jacks are not con-	Make A/V connections. Stereo is
	nected to TV A/V In jacks.	available only via A/V output from VCR.
	DVD+VCR Audio/Video Out is not	Select AUX or A/V source as TV input.
	selected for viewing at the TV.
	DVD+VCR BROADCAST TYPE mode is	Set BROADCAST TYPE mode to
	set to SAP or MONAURAL.	STEREO. See “Setting the VCR Setup
		Menu” on page 16.
	Using RF Output with Stereo TV.	Connect TV via audio/video cables and
		select AUX or A/V source as TV input.

Moisture Condensation

Moisture condensation can occur:		In locations where moisture condensation may occur:
•	When the DVD+VCR is moved from a cold place to a	•	Keep the power cord plugged into an AC outlet and
	warm place.		POWER On. This will help prevent condensation.
•	Under extremely humid conditions.	•	When condensation has occurred, wait a few hours
			for the VCR to dry before using it.

35