GoVideo DVR 4200, DVR 4250 manual VCR Operation Tape Counter Memory Feature, Additional Information

VCR Operation (Continued)

Tape Counter Memory Feature

Real-Time Counter

Shows length of tape run in hours, minutes, and sec- onds (refer to the left). Press CLK/CNT to select the real-time counter display.

Every press of CLK/CNT changes the TV screen as illustrated below.

2:15 AM	M 0:05:25	REM 1:07
CLOCK	COUNTER	REMAINING TIME

Counter changes to “M 0:00:00” when the cassette is ejected.

The real-time counter does not operate when nothing is recorded on the tape.

The real-time counter will not work when the tape is not inserted.

Counter Memory Function

This is useful if there is a section of tape you want to view immediately after recording or if you want to return to the same point several times.

1Begin recording or playing a tape.

2 Press CLK/CNT repeatedly to display the real- time counter appears on the TV screen.

3 At the point that you want locate later, reset the real-time counter to “M 0:00:00” by pressing

CLEAR.

4Continue to play or record.

Press	STOP when recording or playback finish-
5 es.

6The tape automatically stops when the tape counter returns to about “M 0:00:00”.Press REW.

Tape Remaining

This function allows the time of the remaining tape to be displayed during recording or playback.

Press CLK/CNT until the REM indicator displays on the TV screen during recording or playback.

Note

The remaining tape length indicator may not be displayed correctly depending on the condition of the tape and the kind of the tape (T-140, T-160, or T-210 etc)

Additional Information

In manual recording, Timer recording, One-Touch Recording, playback, or fast forward modes, the VCR automatically starts rewinding the tape at the end of the tape. The cassette will stop at the beginning of the tape and be ejected, and the VCR will turn itself off.

After you have finished using the VCR, rewind, eject, and remove the cassette. Place the cassette in its protective sleeve to protect it from dust. It is not necessary to rewind the cassette before removing it, but if you do, it will be ready to play or record the next time you use it.

Be sure the VCR Channel Selector is on the correct channel you wish to record. The channel that is being recorded can always be checked by setting the television on the VCR channel (3 or 4) and pressing the TV/VCR selector to turn the VCR’s VCR indicator on.

Do not attempt to hook up more than one television set to the VCR for either recording or playback.

OPERATION

27