RECORDING
Satellite Link
You can set the unit to start recording whenever it detects a video signal from the external tuner.
Preparing for the Satellite Link:
•Only L1 (rear) is available for satellite link and be sure that this L1 needs to be connected by the external tuner.
•The external tuner should be equipped with some kind of timer function. Using timer function of the tuner, set it to the output audio/video signals when it comes to the time you want to start recording, and stop those signals when it comes to the time you want to finish recording.
Refer to the tuner’s manual on how to set the timer.
L1
VCR
|
|
|
|
|
|
|
| AUDIO IN | To video out jack | external tuner | |
DIGITAL | AUDIO |
|
|
| |||||||
| AUDIO OUT |
| |||||||||
|
| DVD | Y | L | VCR |
|
| ||||
|
|
|
| DVD/VCR |
|
|
|
| |||
AUDIO OUT | OUT | OUT VIDEO OUT |
|
|
|
|
|
| |||
|
| L | CB | R | AUDIO IN | VIDEO IN |
|
|
| ||
|
| R | VIDEO IN |
|
|
| |||||
| COAXIAL |
|
| VIDEO OUT |
|
|
| ||||
CR
To audio(L)out jack
RCA audio/video cables
VHSVHS Press VCR first.
1 Press SPEED to select the desired tape speed.
|
|
|
|
|
| SP |
|
|
|
|
|
|
|
|
|
|
|
2 |
|
| SETUP | . |
|
|
|
|
In the stop mode, press |
|
|
|
| ||||
|
|
|
|
|
|
|
| |
3 | Use | / | to select |
|
| TIMER PROGRAMMING | ||
|
|
|
|
|
| - M E N U - |
|
|
| “SATELLITE LINK”. Then, press |
| B SATELLITE LINK |
|
| |||
|
| AUTO REPEAT | [OFF] | |||||
|
| to go to the next step. |
|
| CLOCK SET |
|
| |
|
|
|
| LANGUAGE SELECT | ||||
|
|
|
|
|
| |||
|
|
|
|
|
|
|
| |
4 | Use | / | to select the |
|
| SATELLITE LINK | ||
| to |
|
|
| ||||
| desired hour. Then, press |
| 0 1 : 0 0 | PM | ||||
go to the next step.
Then, repeat procedures above to select the minute
as well.
The hour can be selected from
5 Press 
to set satelliteSATELLITE LINK link standby mode.
0 1 : 3 0 PM
[ON]
[TIMER REC] indicator: lights up and the unit goes to the DVD mode. If you do not use DVD function, turn OFF the unit.
An external tuner must be turned ON for satellite link to start. If external tuner is not set to output signals, satellite link will remain in standby mode.
To Cancel the Satellite Link on Standby:
Press [TIMER SET] on the remote control or [STOP/EJECT C A] on this unit.
To Cancel the Satellite Link in Progress:
Press [STOP/EJECT C A] on this unit.
22
Note: • Recording picture will be distorted if the copy protection signal is being detected during
satellite link.
•When the timer recording and the satellite link are overlapped, those recordings are recorded as illustrated below.
e.g.) In case of the satellite link is overlapped on the exist- ing timer recording.
timer recording
satellite link
recording result
e.g.) In case of the timer recording is programmed in the middle of the satellite link.
timer recording
satellite link
recording result
e.g.) In case of the timer recording is overlapped on the existing satellite link.
timer recording
satellite link
recording result
Dubbing a Cassette Tape
Warning: Unauthorized recordings of copyrighted cassette tapes may be an infringement of copyright laws.
|
| front of the unit | ||
output jacks of | VIDEO OUT | VIDEO |
| |
external device | ||||
RCA video cable |
| |||
|
| |||
|
| AUDIO | ||
|
|
| ||
or | AUDIO OUT |
|
| |
L |
|
| ||
| L2 |
| ||
| RCA audio cable |
| ||
R
You can use a video disc player, cable/satellite box or other devices with the audio/video output jacks.
VHSVHS Press VCR first.
1)Press [SPEED] on the remote control to select recording speed (SP or SLP).
2)Press [INPUT] on the remote control to select L1 or L2 whichever the jack the external device is connected to.
3)Press [RECORD] on the unit, and then start playback of the external device.
4)To stop recording, press [STOP/EJECT C A] on this unit.
5)Stop playback of the external device.
Note: • For best results during dubbing, use buttons on this unit whenever possible. The remote control
might affect another device’s operation.
EN