- 19 - EN
9I03

TIME SEARCH

The Time Search function makes it possible to quick-
ly advance the tape to your desired position simply by
entering the exact amount of playback time you want
to skip.
NOTES:
•Time Search can be set up to a maximum of 9
hours 50 minutes (9:50) by 10 minutes at a time.
•This function will not operate in recording mode.
In the example below: To watch a program that is 2
hours, 50 minutes from the present tape position, in
either direction.
1Insert a tape.
2Select “TIME SEARCH” mode
Press the TIME SEARCH button
(with each push it will increase by
10 minutes).
3Enter your desired time
Press the PLAY/Kor STOP/Lbutton until your
desired time appears. (Example: “2:50” stands for 2
hours 50 minutes)
If you wish to cancel the Time Search at this point,
press the MENU button on the remote control.
4Begin Time Search
By pressing the REW/sor F.FWD/Bbutton, the
TV/VCR will rewind or fast forward to the specified
point.
The time counts down as the searching progresses.
When 0:00 is reached, the tape will start playback
automatically.

TO CANCEL THE TIME SEARCH at this

point

Press the STOP/EJECTbutton on the TV/VCR or the
remote control. This will delete the selected time.
TIME SEARCH
2 : 50
This function enables you to improve the picture
quality when playing back worn cassettes such as
rented tapes.
1Select “USER’S SET UP”
Press the MENU button on the
remote control.
Press the PLAY/Kor STOP/Lbut-
ton to point to “USER’S SET UP”.
Then, press the F.FWD/Bbutton.
2Set “RENTAL”to [ON]
Press the PLAY/Kor STOP/Lbut-
ton to point to “RENTAL”.
Press the F.FWD/Bor REW/s
button until [ON] appears.
3Exit the Rental setting
Press the MENU button on the remote control to
return to the TVmode.
4Start playback
Press the PLAY/Kbutton to start playback.
“RENTALPLAY B” appears.
•Once you select the Rental mode, it stays in effect
even after you turn off the TV/VCR.

TO CANCEL THE RENTAL MODE

Repeat steps [1] and [2], select [OFF] using the
F.FWD/Bor REW/sbutton on the remote control.
Press the MENU button on the remote control to
return to TVmode.
If there is a powerfailure of any kind, the unit
will rememberthe setting.
– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
BUSER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
– USER’S SET UP–
BRENTAL [ON]
REPEAT PLAY [OFF]
AUTO RETURN [OFF]
RENTALPLAYBACK
This feature allows you to reposition or reduce the
noise lines of a still picture. Press the PAUSE/STILL
button so that the noise lines change position on the
screen so you can see the picture in its entirety with-
out distracting noise lines.
NOTE: This feature can be activated ONLYwhen
viewing a tape recorded in the SLPmode. If the tape
was originally recorded in the SPor LP mode, the
still picture may revert to black and white in addition
to the “noise bars”. This is normal.
NOISE CANCEL(in the Still mode)
T5508UJ(EN).QX33 04.4.12 10:04 AM Page 19