- 14 - EN
9I03
TV OPERATION

WATCHING A TV PROGRAM

1Turn on the TV/VCR
Press the POWER button to turn on the TV/VCR.
2Select the channel number
Press the CHANNELKor Lbutton to select your
desired channel number or press the number buttons
on the remote control.
Remember: If the TV/VCR is connected to a cable
box or satellite box, the TV/VCR must be on CH3 or
CH4, then the channel to be viewed must be selected
on the cable box or satellite box.
3Adjust sound
Press the VOLUME XXor YYbutton
to adjust the volume.

GAME MODE

This function enables you to decrease the TVscreen
contrast and making it suitable for use with a Video
game system.
NOTE: This function CANNOT be set during
recording.
Press the GAME button on the
remote control. “GAME” appears
on the screen.
When you press the GAME button;
•The TV/VCR turns on automatically.
•The TV/VCR will select front A/Vinput mode
automatically.

TO CANCEL THE GAME MODE

Press the GAME button or CHANNELKor Lbut-
ton on the remote control.

PICTURE CONTROL

The TV/VCR’s picture controls – BRIGHT, CON-
TRAST, COLOR, TINTand SHARPNESS – are
preset to factory specifications. Although they are
usually the best, you may need to make some further
adjustments for a natural looking image.
NOTES:
•Procedures must be followed within 5 seconds or
the Picture Control mode will be cancelled.
•When setting the Picture Control, the Game mode
will be cancelled.
Make sure ...
•TV/VCR power must be turned on.
1Select “PICTURE CONTROL”
Press the MENU button on the
remote control.
Press the PLAY/Kor STOP/Lbut-
ton to point to ”PICTURE CON-
TROL”.
Then, press the F.FWD/Bbutton.
2Select item you want to adjust
Press the PLAY/Kor STOP/Lbutton until desired
control is displayed.
BRIGHT
CONTRAST
COLOR
TINT
SHARPNESS
3Adjust the picture control
Press the F.FWD/Bor REW/sbutton to adjust to
your desired level.
•If there is a powerfailure of any kind, the unit will
retain its setting.
VOLUME 20
C C C C C C C C C C C C
GAME
– M E N U –
TIMER PROGRAMMING
BPICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
BRIGHT
– PPPPPPPPPPPPPPCCPPPPPPPPPPPPPP +

DEGAUSSING

This television has a degaussing circuit that will clear
up color errors on the TVscreen that are caused by
any excess magnetism which happens to get too close
to the TV. This circuit is designed to operate once
when the set is first plugged in. If minor color errors
are seen in some locations on the screen, please
unplug the TVfor approximately 15 minutes. When
the TVis plugged back in, the degaussing circuit will
operate once to clear them up. Repeat this procedure
any time the TVscreen is accidentally magnetized, or
when the TVis moved or relocated.
to decrease
brightness
to decrease
contrast
to pale to brilliant
to green
to clear
to purple
to soft
to increase
brightness
to increase
contrast
BRIGHT
CONTRAST
COLOR
TINT
SHAPNESS
Arrow Button {Arrow Button B
T5508UJ(EN).QX33 04.4.12 10:04 AM Page 14