- 18 - EN
9I03

PICTURE SEARCH

This feature is very useful in finding or skipping over
a particular scene on a tape. In this mode, the sound
will be muted.
1)You may view a video tape at a high speed in
either a forward or reverse direction by pressing
the F.FWD or REWbutton during playback (in the
SP/ LP / SLP modes).
2)Press it again and the TV/VCR will now search in
super high speed (in the LP/ SLP modes only).
NOTE: Tapes recorded in the SPor LP mode will
display a noise bar on the TVscreen and the pic-
ture may revert to Black and White. This is normal.
3)Press the PLAY/Kbutton to return to normal
speed.
SEARCH

ZERO RETURN

This function allows you to search easily a beginning
point that you want to review by rewinding or fast
forwarding.
NOTE:
Zero Return WILL NOTwork on a blank tape or a
blank portion of a tape.
1Stop a tape at your desired point
Rewind or fast forward the tape to the beginning
point from which you want to review.
2Reset the counter to 0:00:00
Press the COUNTER RESET button repeatedly.
3Begin recording or playback
Press the RECORD or PLAY/Kbutton.
Press the STOP/Lbutton when recording or play-
back is completed.
4To activate “ZERO RETURN” mode
Press the MENU button on the
remote control.
Press the PLAY/Kor STOP/Lbut-
ton to point to “ZERO RETURN”.
Then, press the F.FWD/Bbutton.
The counter will appear on the TVscreen.
The tape will automatically stop when the counter
returns to 0:00:00.
– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
BZERO RETURN
TIME SEARCH
The TV/VCR has an auto repeat function that allows
you to repeat a tape indefinitely without touching the
PLAYbutton.
ALL REPEAT:Repeat playback from the beginning
to the end of the tape.
BLANK REPEAT: Repeat playback from the begin-
ning to a blank part of more than 10 seconds.
1Select “USER’S SET UP”
Press the MENU button on the
remote control.
Press the PLAY/Kor STOP/Lbut-
ton to point to “USER’S SET UP”.
Then, press the F.FWD/Bbutton.
2Select “ALL”or “BLANK”
Press the PLAY/Kor STOP/Lbut-
ton to point to “REPEATPLAY”.
Press the F.FWD/Bor REW/s
button repeatedly until your desired
selection [ALL] or [BLANK] appears.
3Exit the Repeat Play setting
Press the MENU button on the remote control to
return to the TVmode.
4Start playback
Press the PLAY/Kbutton to start the Repeat Play.
”REPEATPLAY B” appears.
•Once you select the Repeat Play mode, it stays in
effect even after you turn off the TV/VCR.
•If the Rental mode is set [ON], the “RENTAL
PLAYB” display has priority.
AUTO REPEATPLAYBACK
– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
BUSER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
– USER’S SET UP–
RENTAL [OFF]
BREPEAT PLAY [ALL]
AUTO RETURN [OFF]
NORMAL PLAYBACK
Make sure ...
•TV/VCR power must be turned on.
1Insert a prerecorded tape
If the erase-protection tab has been removed, the
TV/VCR will start playback automatically.
2To begin playback
Press the PLAY/Kbutton.
Note: If any menu is activated on
the screen, the PLAY/Kbutton does
not function. Press the MENU but-
ton to clear the menu, then press the PLAY/Kbutton.
3To stop playback
Press the STOP/Lbutton when playback is complet-
ed.
PLAY B

TO CANCEL THE REPEAT PLAYMODE

Repeat steps [1] and [2], select [OFF] using the
F.FWD/Bor REW/sbutton on the remote control.
Press the MENU button on the remote control to
return to TVmode.
If there is a powerfailure of any kind, the unit
will retain its memory forthis feature.
T5508UJ(EN).QX33 04.4.12 10:04 AM Page 18