RECORDING
To Record From DVD To Videotape during DVD playback
1 Press [DVD] to select DVD mode.
Insert the desired DVD disc.
You cannot record
Insert a recordable tape into the VCR.
2 Press [PLAY] to start the DVD playback and press [REC] to start the VCR recording.
3 To exit record, press [
].
Recording stops automatically when recorded tape reaches the end.
Video recorded in PROGRESSIVE SCAN mode will playback abnormally. First change PROGRESSIVE to INTERLACED mode in the SCAN MODE screen, then record from DVD to videotape. (refer to pages 44, 47)
This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.
VCR OPERATION
One Touch Recording (OTR)
■To record the current TV program at the touch of a button, follow the procedures below.
1
2
3
First, follow steps 1 to 4 under “To Record With VCR” on page 24.
Press [REC] repeatedly to set the desired recording time:
Once | continuous recording until you press [STOP] |
Twice | record for 30 mins from current time |
3 (times) | record for 1 hour |
. | . |
. | . |
10 | record for 5 hours |
11 | record for 6 hours |
12 | record for 7 hours |
13 | record for 8 hours |
14 | record for 9 hours |
15 | Return to normal (continuous) recording |
To stop Recording, press [STOP].
•If the program is running overtime, pressing [REC] will extend the recording time 1/2 hour.
25