GoVideo DV1030 manual Troubleshooting VCR, DC-B86B1N-PS 04.5.20 929 PM 페이지55

DC-B86B1N-PS 04.5.20 9:29 PM 페이지55

TROUBLESHOOTING (VCR)

Symptom Checks

•“Power On” does not work.➤ Make sure the power plug is inserted in an electric outlet.

• Unit does not work even in	➤ Make sure a videotape is inserted.
“Power On”.	➤ Press [VCR] on the remote control or press DVD/VCR on the
	front panel of the unit.

➤Unplug the unit and plug it in again.

•A videotape will not insert.➤ Make sure a power plug is inserted in an electric outlet.

➤Make sure a videotape is not already inserted.

➤Make sure the videotape is inserted in the right direction (the side with the transparent window should be on the top)

➤Have you inserted the videotape again just after the tape was ejected? Try it again after fully ejecting it.

➤When a videotape jams on insertion the tape may not be inserted correctly. Remove the tape and then reinsert it gently.

•On inserting a videotape, the tape ➤ This is a safety feature to protect your videotape. Please pull

is re-ejected. out the tape and insert it again.

•A videotape is not ejected.➤ If the product is not used for a long time, a videotape may not be ejected because the tape inside may be stretched. In this case, unplug the unit for about 10 minutes, plug it in again, then press [EJECT].

• A channel on video and a play	➤ Check your antenna’s connection.
screen does not appear.	➤ TV channel should be set to video channel (3 or 4).

➤Check if your antenna’s signal is weak. If so, connect a frequency amplifier to the device.

➤Press [TV/VCR] until “VCR” is displayed on the display panel.

•Noise (screen noise) appears on ➤ VCR is not playing and is tuned to a weak TV channel.

screen.	➤ Select TV by pressing [TV/VCR] on remote control.
• Noise appears on screen after	➤ While playing a videotape, there may be some noise at the
recording.	beginning of the tape or when resuming playback after pausing
	the tape, which is normal.

•While in Play mode noise appears. ➤ Press [TRK +/–] for better picture quality. Videotape may be poor. Try playing another one to decide if the problem is the tape of the VCR.

•Sound and picture are irregular. ➤ Use a head-cleaner to clean the VCR heads. VCR heads may

• Sound comes on but picture does	be contaminated.
not appear.

•Screen is irregular and stripes appear.

•"Screen Error" message is displayed on screen.

•While recording and playing, the ➤ Because VCR Play signals are not stable like a TV signals, the

top of screen waves.	screen may be unstable or curved while playing. To fix the
	problem, adjust the horizontal adjustment on the TV.
• A screen is not clear.	➤ If the videotape is old or was recorded on another model
	bands may appear on the screen.
	➤ Try using the [TRK+/–] buttons.
	➤ Try using a head-cleaner.

55

HELP