DC-B86B1N-PS 04.5.20 9:29 PM 페이지56
TROUBLESHOOTING (VCR)
Symptom | Checks |
•A screen in Pause mode is shaking or slow playback is not clear.
➤Try using a
➤Try using the
•The unit will not record a TV program.
➤Check whether the desired channel is visible on the screen. If not, press [TV VIEW] to view the TV.
➤Check whether the timer recording settings are right.
➤Are RF cables connected to the antenna connection correctly?
➤Does a channel number appear on the display?
➤Check the record safety tab on the videotape.
➤Is the RF cable connected to the "ANT.IN" terminal?
•When [REC] is pressed, the videotape is immediately ejected.
➤Make sure the clock is set correctly.
➤Does the display show “ 
” (Ready for timer recording)?
➤Make sure the timer recording settings are right.
➤Check the record safety tab on the videotape.
•Timer recording from Cable TV does not work.
➤Was the cable data output code set correctly?
➤Is the cable box setup and output channel set correctly? Refer to its user manual for instructions.
➤Did you enter a password? (Please cancel it.)
➤Did you turn off your player? (Please turn it on.)
•In spite of pressing [CH+/-], a channel can not be set.
➤The selected channel cannot be stored.
➤Please check your channel settings or press a number button.
•Screen is distorted while playing a copy of a tape.
➤Some rental tapes or discs are set to prevent copying in manufacturing. These tapes cannot be duplicated in good condition.
•Remote control does not work.
➤Battery may be weak or dead.
➤Make sure you are within 23 feet (7 meters) of the unit, and that there are no obstacles between the remote and the front panel.
•[REW] and [FF] Buttons on remote control do not work.
➤If a videotape is completely rewound, “VISS REW” and “REW” do not work.
➤If a videotape has been played completely the end, “FF”, “VISS FF”, “PLAY” and “REC” do not work.
•VISS index search does not work.
➤Are you playing a tape that was not recorded in this recorder?
➤You may have started recording while the VCR was paused. Please start recording from Stop mode.
•Cable broadcasting can not be selected.
➤Select “CABLE” not “NETWORK” in the “CHANNEL SETTING” menu.
56