VIDEO SETUP
■To set the DVD+VCR to match the capabilities of your TV:
1 | While in Stop mode, press |
| TV ASPECT | 4:3 LB | |
[SETUP]. |
| VIDEO OUT | COMPONENT | ||
|
|
| |||
|
|
| SCAN MODE | INTERLACED | |
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Selecting TV ASPECT.
2 If you select “4:3 LB”, you can watch the original widescreen movie, but black bars will appear above and below the picture.
If you select “4:3 PS”, the picture will fill the screen but the sides of the movie will be cropped.
If a disc size was recorded in 4:3, you cannot watch it in wide screen even if TV WIDE”.
| TV ASPECT | 4:3 LB | ✓ |
| VIDEO OUT | 4:3 PS |
|
| SCAN MODE | 16:9 WIDE |
|
|
|
|
|
|
|
|
|
ASPECT is set to “16:9
Selecting VIDEO OUT. |
| TV ASPECT |
|
You may set VIDEO OUT to |
| VIDEO OUT | |
| SCAN MODE | COMPONENT✓ | |
3 COMPONENT. |
|
|
|
*If VIDEO OUT is set to
Selecting SCAN MODE. |
| TV ASPECT | |
You may set SCAN MODE to |
| VIDEO OUT | |
| SCAN MODE | INTERLACED ✓ | |
4 INTERLACED or PROGRESSIVE. |
|
| PROGRESSIVE |
*If SCAN MODE is set to “INTERLACED”, connect Y/Pb/Pr on the DVD+VCR to the INTERLACED input on your TV.
If SCAN MODE is set to “PROGRESSIVE”, connect Y/Pb/Pr on the DVD+VCR to the PROGRESSIVE SCAN input on your TV.
DVD FEATURE SETUP
47