GoVideo DV1040 One Touch Recording OTR, Press DVD to select DVD mode Insert the desired DVD disc

RECORDING

To Record From DVD To Videotape during DVD playback

1 Press [DVD] to select DVD mode.

Insert the desired DVD disc.

You cannot record copy-protected DVD discs.

Insert a recordable tape into the VCR.

2 Press [PLAY] to start the DVD playback and press [REC] to start the VCR recording.

3 To exit copy, press [].

Recording stops automatically when DVD playback is finished or recorded tape reaches the end.

Video recorded in PROGRESSIVE SCAN mode will playback abnormally. First change PROGRESSIVE to INTERLACED mode in the SCAN MODE screen, then record from DVD to videotape. (refer to pages 44, 47)

This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.

Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

VCR OPERATION

One Touch Recording (OTR)

■To record the current TV program at the touch of a button, follow the procedures below.

1

2

3

First, follow steps 1 to 4 under “To Record With VCR” on page 24.

Press [REC] repeatedly to set the desired recording time:

Once	continuous recording until you press [STOP]
Twice	record for 30 mins from current time
3 (times)	record for 1 hour
.	.
.	.
10	record for 5 hours
11	record for 6 hours
12	record for 7 hours
13	record for 8 hours
14	record for 9 hours
15	Return to normal (continuous) recording

To stop Recording, press [STOP].

25