GoVideo DV1040 manual You can program playback

ABOUT MP3, JPEG DISCS

6	You can program playback.
	Select the file or folder in LIST
	folder. Then press [PROGRAM].
	The selected file or folder will go
	into PROGRAM folder.
	Press [PLAY] in PROGRAM
	folder.
	To move all the files selected in
	LIST folder to PROGRAM folder,
	select	and press [ENTER].

MUSIC > MP3

√ 001/018 0:00:34 / 0:03:59 REPEAT ONE

LIST	PROGRAM
_ _	6. 06(musicfamily.i
1. 01(musicfamily.i	2. 02(musicfamily.i
2. 02(musicfamily.i	5. 05(musicfamily.i
3. 03(musicfamily.i
4. 04(musicfamily.i
5. 05(musicfamily.i
6. 06(musicfamily.i
7. 07(musicfamily.i

\max 6\02(musicfamily.i.am) Lager T

If you want to delete all the files in the PROGRAM folder, select by pressing [> v] and press [ENTER].

If you want to delete one file from the programmed playback, select it and then press [CLEAR] button. This does not remove the file from the disc.

The ability of this unit to read MP3 discs is dependent on the following:

•The Bit Rate must be within 64-256 kbps.

•The maximum number of directories should not exceed 32.

•The maximum depth level of directories should not exceed 4.

•If a file is recorded with a variable bit rate (VBR) (Example : 54~256kbps) distortion may occur during playback.

•File names should be 8 or fewer letters and/or numbers, and must incorporate the “MP3” file extension. EXAMPLE: ********. MP3 where each * is a letter or number.

•Use only letters and/ or numbers in file names. If you use special characters, the file and/ or folder names may not be displayed correctly on the on-screen display.

Caution

•Avoid using CD-RW (Rewritable) discs. They may not play back correctly.

•The CD-R should be written using the ‘disc at once’ method.

•Only discs made with ISO 9660 formatting can be played.

42