Emerson EWR20V5 One-touch Timer Recording, First DVD Turn on the unit and load a recordable disc

Page 32

Recording

One-touch Timer Recording

VideoVR

DVD-RW DVD-RW DVD-R

This is a simple way to set the recording time in blocks of 30 minutes. Check that the disc has enough recordable space for the time you set.

After finishing the recording, the recorder automatically goes into standby.

First: DVD

1

Turn on the unit and load a recordable disc.

Make sure that the TV input is set on the unit.

This operation may take a while to be recognized.

2

Using [REC SPEED], select a recording speed.

Refer to “Recording speed” on page 25.

3

Make sure that the recording format is set to the desired mode.

Refer to “Formatting a disc” on pages 27-28.

When a DVD-RW disc is loaded:

You can choose Video mode or VR mode from the Setting menu. “Video mode” has been selected as the default. Refer to page 27 “Choosing the recording format of a blank disc.”

When a DVD-R disc is loaded:

DVD-R discs will always be in Video mode.

4

Using [CH K / L] or the

Number buttons, select a desired channel to record.

5

Hit [REC/OTR] repeatedly to select a desired recording time.

Recording time appears on the TV screen (30 minutes to 8 hours). Recording will start.

I0:30

0:30

(Normal Recording) 1:00

8:00 7:30

When the unit reaches the speci- fied time, it will turn off automati- cally.

To change the recording time dur- ing the one-touch Timer Recording, hit [REC/OTR] repeatedly until the desired time appear.

To cancel the one-touch Timer Recording within the specified time, hit [STOP C].

This operation may take a while to be completed.

 

POWER

T-SET

 

OPEN/CLOSE

 

 

 

TIMER PROG.

 

 

.@/:

ABC

DEF

 

 

 

1

2

3

 

4

 

GHI

JKL

MNO

CH

 

4

5

6

 

 

PQRS

TUV

WXYZ

VIDEO/TV

 

 

7

8

9

 

 

 

DISPLAY

SPACE

CLEAR

SETUP

 

 

 

0

 

 

 

 

TOP MENU

MENU/LIST

RETURN

ENTER

 

 

REC/OTR

VCR

DVD

REC/OTR

5

2

REC SPEED

 

PLAY

 

REC MONITOR

SKIP

PAUSE

SKIP

 

 

SLOW

CM SKIP

STOP

SEARCH

5

 

DUBBING

ZOOM

AUDIO

 

Note

The remaining recording time will appear on the display panel during an one-touch Timer Recording. Hit [DISPLAY] to see it on the TV screen.

You cannot pause a one-touch Timer Recording.

Unlike a Timer Recording, you can perform the following operations during a one-touch Timer Recording.

-Turning off the power.

-Using [REC/OTR] and [STOP C].

The unit will be turned off automatically under the follow- ing conditions.

1)No space remained on the disc. 2)When a power failure occurs.

If OTR is finished in DVD dur- ing playback or REC mode in VCR, the DVD will be in STOP mode and the VCR keeps the current mode.

When OTR is finished and the power is turned off, the unit will switch to the standby mode automatically if a Timer Recording has been pro- grammed. Hit [T-SET]to can- cel the standby mode for using the unit continuously.

30

Image 32
Contents Hit Setup Example of a TV Example of a TV remote controlSelect any blank line and hit Enter EndAfter all recordings, finalize your disc Hints for DVD RecordingEditing Supplied AccessoryChanging the Setting menu VCR functions Others Español Precautions Laser SafetyBefore you start Model No Serial NoPrecautions cont’d Before youInstallation Location Reverse engineering or disassembly is prohibitedMaintenance Dolby Digital RecordingTable of contents Features RecordingEditing CompatibilityFunctional overview 12 11Functional overview cont’d VCR/DVD recorder Switching Setting/DISC/CD menu Display menu First DVDFirst VCR Hit Display to display the onscreen displayDisplay message Status of the unitTitle/Track and Chapter MarkPlug in the AC power ConnectionsConnection to a TV MethodTo select channels of the cable box or satellite box Connection to a cable box or satellite boxAfter you have completed connections Connection to an Audio System Method Stereo system Analog audio Input jacksMethod Dolby Digital decoder MD deck or DAT deck Digital audioGetting started Easy DVD recordingThis operation may take a while to be recognized Connections Getting started Recording DiscEasy DVD recording Cont’d Speed ChannelChannel setting Getting channels automaticallyChannel setting cont’d Adding/deleting channelsUsing K / L, select Advanced Setting Menu. Hit Enter Using K / L, select TV Audio Select. Hit EnterUsing K / L, select Stereo or SAP. Hit Enter Selecting the TV stereo or SAPSetting the clock Auto Clock SettingSetting the clock cont’d Manual Clock SettingSetting the daylight saving time Selecting the TV aspect ratioRecording Information on DVD recordingInformation Recordable discWhat is CPRM? Information on DVD recording cont’dRestrictions on recording Making discs playable on other DVD player FinalizeFormatting a disc Choosing the recording format of a blank discReformatting a disc Basic recording Checking the recording picture and sound qualityOne-touch Timer Recording When a DVD-RW disc is loadedUsing REC/OTR and Stop C First DVD Turn on the unit and load a recordable discTimer Recording StartTimer Recording cont’d Before you start Connections Getting started Recording Disc Hints for Timer RecordingPriority of overlapped settings If you want to use Video input Composite Settings for an external sourceConnection to an external source Recording from an external source Settings for an external source cont’dSetting a disc to protect Finalizing will start Using K / L, select Finalize. Hit EnterFinalizing the discs Using K / L, select Auto Finalize. Hit Enter Using K / L, select on Hit EnterFinalizing the discs cont’d Auto finalizeDubbing Mode Using K / L, select Dubbing Mode. Hit EnterMake sure Insert a recordable disc and a videotape with a record tabDubbing Mode cont’d Using K / L, select VCR DVD. Hit EnterHit Setup to exit Hit DVD Using K / L, select DVD VCR. Hit EnterDisc Playback Information on DVD playbackBasic playback PlaybackBasic playback cont’d Playing back MP3 discHit Play B to start play- back Hints for MP3 filesPlaying back discs using the disc menu Playing back discs using the title menuSpecial playback Resume playbackFast forward / Fast reverse Skipping TV commercials during playbackSpecial playback cont’d PauseStep by step playback Slow forward / Slow reverse playbackMarker Setup Using / B, select icon. Hit EnterZoom During playback, hit ZoomUsing Skip H/ G Using DisplaySearch Title/Chapter searchTime search Search cont’dTrack search Repeat playback Random playbackSwitching subtitles Repeat/Random/Program playback cont’dSelecting a format of audio and video Program playbackSwitching audio soundtrack Using K / L, select a desired audio channel. Hit EnterSelecting a format of audio and video cont’d During playback, hit AudioSwitching camera angles Some DVD-Video discs feature Scenes shot from two or moreVisual Noise Reduction Noise Reduction menu will appearEditing Information on disc editingEditing discs in Video mode Deleting titlesPutting names on titles Editing discs in Video mode cont’d Setting or clearing chapter markersFirst DVD Using K / L, select Yes Hit Enter Using K / L, select Chapter Mark. Hit EnterEditing discs in VR mode Original Using K / L, select Original. Hit EnterBe advised that the titles once deleted cannot be recovered Original list will appearEditing discs in VR mode Original cont’d Setting titles to protectUsing K / L, select Protect. Hit Enter Follow steps 1 to 3 on page 57 to display the Original menuYou can cancel the title-protecting Releasing titles from protectingConfirm the indication On OFF. Hit Enter Key icon will disappear from the title in the original listUsing K / L, select Playlist. Hit Enter Editing discs in VR mode PlaylistFirst DVD Hit SETUP. Using / B, select Disc. Hit Enter Deleting parts of titles Editing discs in VR mode Playlist cont’d Using K / L, select Edit Title Name. Hit EnterWhen you select Add at , a DeleteYou cannot delete the first chapter of each title New chapter marker will be addedSetting pictures for thumbnails Picture for thumbnail will be setUsing K / L, select Yes. Hit Enter Dividing a titleYou can divide a title into two New titles After this operation is comUsing K / L, select Title Combining. Hit Enter Combining titlesYou can combine two titles into a single title Two titles will be combined into a single titleAdding titles to a Playlist Deleting a PlaylistChanging the Setting menu Tour of the Setting menuLanguage setting Language setting cont’d Display settingSubtitle Language Default OFF Using K / L, select a lan Guage. Hit EnterDisplay setting cont’d Audio settingAudio setting cont’d Using K / L, select a set- ting. Hit EnterUsing K / L, select a setting. Hit Enter When playing back a DVD-RW disc recorded in VR modeSettings for Parental lock level Hit Stop C if you are playing a discSettings for Parental lock level cont’d Parental Lock Default AllUsing K / L, change the parental level. Hit Enter If you select No, proceed to stepRecording and One-touch Timer Recording VCR functionsPlayback RecordingRecording and One-touch Timer Recording cont’d One-touch Timer RecordingUsing REC/OTR or Stop C Index searchOther operations Others TroubleshootingSymptom Remedy Or Setup Cause Solution Troubleshooting cont’dSymptom RF output switch Error message Cause SolutionFor more than 3 seconds Before you start Connections Getting startedGlossary Language codeCan I record on CD-R/RW? No, this unit records only DVDs Frequently Asked QuestionsSpecifications Español Fácil grabación de DVDNota Esta operación puede demorar en reconocersePaso 6 Pare la GrabaciónReproducción con videograbadora NotaGrabación Grabación con temporizador de un toque OTRLimited Warranty