Daewoo DF-8150P Basicic Recordingi, Follow the instructions below to record a TV program

Page 23

Other Disc Playback

3Select the thumbnail you want to display using […†œ √] and press [ENTER].

4The full size image will be displayed and a slide show starts automatically with a time interval of 10 seconds.

5Press [NEXT] or [PREV] to manually skip to the next or previous image.

6Press [√] (or [œ]) to rotate the image (counter) clockwise.

7Press [STOP] to exit the slideshow.

•If the disc contains MP3 files as well as JPEG files, you can change the Play mode to play MP3 files by pressing [TITLE].

•When a CD contains both MP3 files and JPEG files, the default Play mode is JPEG image files.

•The DVD Recorder+VCR can playback up to 1000 files per disc.

•MP3 files encoded below 64kbps are not supported.

Playing MP3 Files During a Slide Show

You can enjoy a slide show while listening to MP3 music files.

1Prepare a CD which includes both MP3 and JPEG files.

2Insert the CD and play an MP3 file.

3Press [TITLE] while playing the MP3 file to change the Play mode. The music playback will not stop.

4Select an image file and press [ENTER] to start the slide show.

5The MP3 file you selected continues to play during the JPEG slide show.

Basicic Recordingi

Recording from TV

Follow the instructions below to record a TV program.

1Turn on the DVD Recorder+VCR and load a recordable disc or tape.

Make sure your TV input is set to view the DVD Recorder+VCR.

2Set the desired Recording mode by pressing [REC MODE] repeatedly.

DVD: HQ (High Quality - 1 hr/disc), SP (Standard Play - 2 hrs/disc), EP (Extended Play - 4 hrs/disc), or SLP (Super Long Play - 6 hrs/disc).

VCR: SP (Standard Play), LP (Long Play - 2 times SP)

3If your DVD Recorder+VCR does not show a TV program, press [TV VIEW] on the remote control. Use [PR+/–] to select the TV channel you wish to record.

4Press [AUDIO] to select the audio channel to record (Stereo, BIL, or Mono).

The table below shows what audio channel will be recorded with different settings and different types of broadcasts.

The last column (Monitor Audio) shows what you will hear during recording. For example, if the TV broadcast is in Stereo, then setting the DVD Recorder+VCR to Stereo will record the broadcast in Stereo, and the Monitor Audio will also be in Stereo.

TV Broadcast

Selected Audio

Broadcast Audio

Monitor

L Ch

R Ch

Audio

 

 

MONO

MONO

MONO

MONO

MONO

STEREO

STEREO

L

R

STEREO

MONO

MONO

MONO

MONO

 

 

BIL I

BIL I

BIL I

BIL I

BIL

BIL II

BIL II

BIL II

BIL II

 

(BIL Off)

(BIL I)

(BIL I)

(BIL Off)

5Press [REC (●)] once.

Recording will start. The REC indicator lights on the front panel display.

Recording continues until you press [STOP] or the disc is full.

To record for a fixed length of time, see One Touch Record on the next page.

6Press [STOP (■)] to stop recording.

•The maximum number of DVD titles per disc is 49. If the DVD Recorder+VCR is powered off during DVD recording, the recording will not be saved.

•If a DVD+RW or unfinalized DVD+R disc is inserted in the tray, no title is played automatically after loading is finished.

•If you are recording to a blank DVD+R (+RW) disc, it may take up to 7 minutes (it depends on disc) for post processing after recording.

PLAYBACK RECORDING

42

 

 

 

43

 

 

Page 22 Page 24
Image 23
Page 22 Page 24
Contents 97P95600D0-1V DVD Recorder + VCRFor your own Safety Safetyty InstructionsI t tiAlcohol- based cleaning agents PrecautionsAll operating and use instructions should be followed Important SafeguardsUnit leave all servicing to qualified service personnel Avoid direct exposure to beamTable of Contents Following discs can be used in your DVD Recorder+VCR OverviewiNumber of this player, the disc cannot be played After playing, store the disc in its case To keep the surface cleanPrecautions About SymbolsIdentification of Controls Copies from DVD to VCR or from VCR to DVD Remote ControlTurns the DVD Recorder+VCR on and off Details, Refer to One Touch Record OTR onConnect to a TV with an S-Video Input If your cable wire is connected to your TV without aConnectionsti Connect to a TV with an RF coaxial inputAmplifier. Use an optional digital coaxial audio cable Connecting a TVConnecting an Amplifier/Receiver DV Digital Camcorder Initial InstallationConnecting Optional Equipment Initial InstallationAfter finishing Auto Channel Search, set the clock Initial SetupPress Setup to exit the Setup menu Cable If you are using basic cable to receive channelsSet Clock Set ClockAuto Set Press Enter to move to the second level Follow the same procedure as the ‘DVD Record Quality’Press SETUP. The Setup menu appears Use œ and √ to select ‘Language‘Scart jacks, set Video Output to ‘RGB’ Press Setup Use œ/√ to select ‘Preferences‘Press ENTER. The ‘Video‘ submenu is displayed FlickeringUse …/† to select the desired digital output type No signal will be output from the Digital Audio Out jacksEnter your new password DisplayedPress ENTER. The ‘Parental Controls‘ submenu appears PasswordAuto Settings Press Enter to display the submenuOn-Screen Displayi l Overviewverview Function does not work Use …† to change the numbers Press Enter to confirmOSD Menu Options for DVD Slow reverse playback is not supported DVD PlaybackPlaying a DVD It will be automatically selected by the DVD Recorder+VCR VCR PlaybacklŒ3 1 √ † DVD Recorder+VCR can display Jpeg files on CD-R/RW Special Playback FeaturesOthert Disci Playbackl To return to normal playback, press PlayPlaying MP3 Files During a Slide Show Basicic RecordingiFollow the instructions below to record a TV program Make sure your TV input is set to view the DVD Recorder+VCRSP Standard Play LP Long Play, 2 times SP One Touch Copy VHS to DVD Insert the VHS videotape you wish to copy into the VCR deckTape ends During one touch copy you can search and resume copyTimer Recording Troubleshooting When the earlier program finishes, the later program startsCanceling a Timer Recording Stopping a Timer Recording in ProgressRecording from External Components Recording from an External InputDV appears on the front panel display and the TV screen Editing Play a Title Title MenuYou can erase titles on DVD+RW discs only Change Disc NameSave Save the title name Character or function and press EnterCLR Clear the whole title SP Add a spaceAudio cables are not connected securely TroubleshootingClean the video heads Turn on the TVTechnicali l Specificationsi i ions Video output Y Video output terminal, 1.0 Vp-p, unbalancedVideo output DVD Audio output DVDYour 1ST Year MANUFACTURER’S Guarantee Daewoo Guarantee Department
Top Page Image Contents