Daewoo DF-8150P, DF-4100P, DF-4150P, DF-8100P Important Safeguards, Avoid direct exposure to beam

Page 3

Important Safeguards

Important Safeguards

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated ‘dangerous voltage‘ within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance.

This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following procedures for installation, use and servicing. This unit is fully transistorized and does not contain any parts that can be repaired by the user.

1 READ INSTRUCTIONS

All the safety and operating instructions should be read before the unit is operated.

2 RETAIN INSTRUCTIONS

ventilation to ensure reliable operation of the unit and to protect it from overheating. These openings must not be blocked or covered. These openings must not be blocked by placing the unit on a bed, sofa, rug, or other similar surface. This unit should never be placed near or over a radiator or heat radiator. This unit should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

10 POWER SOURCES

INTRODUCTION

WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

IMPORTANT FOR LASER PRODUCTS

LASER This Digital Video Disc Player employs a Laser System. To ensure proper use of this product please read this owner’s manual carefully and retain for future reference. Should the unit require maintenance, contact an authorized service location - see service procedure.

Use of control adjustments or the performance of procedures other than those specified may result in hazardous radiation exposure.

To prevent direct exposure to the laser beam, do not try to open the enclosure. Visible laser radiation when open and interlocks defeated.

DO NOT STARE INTO THE BEAM.

DANGER

Visible laser radiation when open and interlock failed or defeated.

 

 

Avoid direct exposure to beam.

CLASS 1

CAUTION

 

Do not open the top cover. There are no user serviceable parts inside the

LASER PRODUCT

 

Unit; leave all servicing to qualified service personnel.

 

CAUTION Any changes or modification in construction of this device which are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Make sure the unit should be placed at least 8cm apart from the other home appliances or the obstacles to get sufficient ventilation.

This unit shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on this unit.

Switching it off does not disconnect it from the mains (stand-by). To disconnect it from the mains, you have to unplug it.

The safety and operating instructions should be retained for future reference.

3 HEED WARNINGS

All warnings on the unit and in the operating instructions should be adhered to.

4 FOLLOW INSTRUCTIONS

All operating and use instructions should be followed.

5 CLEANING

Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

6 ATTACHMENTS

Do not use attachments unless recommended by the unit’s manufacturer as they may cause hazards.

7 WATER AND MOISTURE

Do not use this unit near water- for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement, or near a swimming pool.

8 ACCESSORIES

Do not place this unit on an unstable cart, stand, tripod, bracket, or table. The unit may fall, causing serious injury to a child or adult as well as serious damage to the unit. Use this unit only with a cart, stand , tripod, bracket, or table recommended by the manufacturer.

8A A unit and cart combination

PORTABLE CART WARNING

should be moved with care.

(symbol provided by RETAC)

Quick stops, excessive force,

 

and uneven surfaces may

 

cause the product and cart

 

combination to overturn.

 

9 VENTILATION

Slots and openings in the case are provided for

This unit should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your dealer or local power company. For units intended to operate from battery power, or other sources, refer to the operating instructions.

11 GROUNDING OR POLARIZATION

This unit is equipped with a polarized alternating -current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way.

This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug still fails to fit, contact your electrician to replace your obsolete outlet.To prevent electric shock, do not use this polarized plug with an extension cord, receptacle, or other outlet unless the blades can be fully inserted without blade exposure. If you need an extension cord, use a polarized cord.

12 POWER-CORD PROTECTION

Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the unit.

13 LIGHTNING

For added protection for this unit during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power line surges.

14 DISC TRAY

Keep your fingers well clear of the disc as it is

2

 

 

 

3

 

 

Image 3
Contents 97P95600D0-1V DVD Recorder + VCRFor your own Safety Safetyty InstructionsI t tiAlcohol- based cleaning agents PrecautionsAll operating and use instructions should be followed Important SafeguardsUnit leave all servicing to qualified service personnel Avoid direct exposure to beamTable of Contents Overviewi Number of this player, the disc cannot be playedFollowing discs can be used in your DVD Recorder+VCR After playing, store the disc in its case To keep the surface cleanPrecautions About SymbolsIdentification of Controls Copies from DVD to VCR or from VCR to DVD Remote ControlTurns the DVD Recorder+VCR on and off Details, Refer to One Touch Record OTR onConnect to a TV with an S-Video Input If your cable wire is connected to your TV without aConnectionsti Connect to a TV with an RF coaxial inputConnecting a TV Connecting an Amplifier/ReceiverAmplifier. Use an optional digital coaxial audio cable DV Digital Camcorder Initial InstallationConnecting Optional Equipment Initial InstallationAfter finishing Auto Channel Search, set the clock Initial SetupPress Setup to exit the Setup menu Cable If you are using basic cable to receive channelsSet Clock Auto SetSet Clock Press Enter to move to the second level Follow the same procedure as the ‘DVD Record Quality’Press SETUP. The Setup menu appears Use œ and √ to select ‘Language‘Scart jacks, set Video Output to ‘RGB’ Press Setup Use œ/√ to select ‘Preferences‘Press ENTER. The ‘Video‘ submenu is displayed FlickeringUse …/† to select the desired digital output type No signal will be output from the Digital Audio Out jacksEnter your new password DisplayedPress ENTER. The ‘Parental Controls‘ submenu appears PasswordAuto Settings Press Enter to display the submenuOn-Screen Displayi l Overviewverview Use …† to change the numbers Press Enter to confirm OSD Menu Options for DVDFunction does not work DVD Playback Playing a DVDSlow reverse playback is not supported VCR Playbackl Œ3 1 √ †It will be automatically selected by the DVD Recorder+VCR DVD Recorder+VCR can display Jpeg files on CD-R/RW Special Playback FeaturesOthert Disci Playbackl To return to normal playback, press PlayPlaying MP3 Files During a Slide Show Basicic RecordingiFollow the instructions below to record a TV program Make sure your TV input is set to view the DVD Recorder+VCRSP Standard Play LP Long Play, 2 times SP One Touch Copy VHS to DVD Insert the VHS videotape you wish to copy into the VCR deckTape ends During one touch copy you can search and resume copyTimer Recording Troubleshooting When the earlier program finishes, the later program startsCanceling a Timer Recording Stopping a Timer Recording in ProgressRecording from an External Input DV appears on the front panel display and the TV screenRecording from External Components Editing Play a Title Title MenuYou can erase titles on DVD+RW discs only Change Disc NameSave Save the title name Character or function and press EnterCLR Clear the whole title SP Add a spaceAudio cables are not connected securely TroubleshootingClean the video heads Turn on the TVTechnicali l Specificationsi i ions Video output Y Video output terminal, 1.0 Vp-p, unbalancedVideo output DVD Audio output DVDYour 1ST Year MANUFACTURER’S Guarantee Daewoo Guarantee Department