LG Electronics M2250D, M2450D, M2550D, M1950D, DM2350D owner manual Data01 Data02Cr

								EXTERNAL CONTROL DEVICE SETUP 103
24. 3D(Command: x t) (only 3D model)							25. Extended 3D(Command: x v) (only 3D model)
To change 3D mode for Monitor set.								To change 3D mode for Monitor set.
	Transmission						Transmission
	[x][t][ ][Set ID][ ][Data01][ ][Data02] [ ][Data03][ ]						[x][v][ ][Set ID][	][Data01][ ] [Data02][Cr]
								Data01 : 3D option
	[Data04][Cr]
Data01								00 : 3D Picture Correction
00			: 3D On					01 : 3D Depth (2D to 3D Only)
01			: 3D Off					02 : 3D Viewpoint
02			: 3D to 2D				Data02 It has own range for each 3D option
03			: 2D to 3D
								determined by Data01.
Data02								1) When Data01 is 00
00			: Top and Bottom					00 : Right to Left
01			: Side by Side					01 : Left to Right
02			: Check Board					2) When Data01 is 01
03			: Frame Sequential					Data Min: 0 to Max: 14
								3) When Data01 is 02
Data03								Data Min: 0 to Max: 14
00			: Right to Left					Data Min: 0 to Max: 06
01			: Left to Right					* Refer to ‘Real data mapping ’. See p.102
Data04
		3D Depth : Min: 0 to Max: 14
								Acknowledgement
* Refer to ‘Real data mapping ’. See p.102								[v][ ][OK][Data01][Data02][x][v][ ][NG] [Data01][x]
*If data1 is 00(3D On), data4 has no meaning.
*If data1 is 01(3D Off) or 02(3D to 2D), data2, data3
	and data4 have no meaning.
*If data1 is 03(2D to 3D), data2 and data3 have no
	meaning.
			Data1	Data2	Data3	Data4
			00	O	O	X
			01	X	X	X
			02	X	X	X
			03	X	X	O
X : don't care

Acknowledgement

[t][ ][OK][Data01][Data02][Data03][Data04][x] [t][ ][NG][Data01][x]

ENGLISH