LG Electronics M2450D, M2250D, M2550D, M1950D, DM2350D owner manual Mounting on a wall

12ASSEMBLING AND PREPARING

Using the Kensington security system Mounting on a wall

ENGLISH

The Kensington security system connector is located at the back of the Monitor set. For more information of installation and using, refer to the manual supplied with the Kensington security system or visit http://www.kensington.com.

Connect the Kensington security system cable between the Monitor set and a table.

For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed installation instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide.

10 cm

10 cm

10 cm

10 cm

NOTE

The Kensington security system is optional. You can obtain additional accessories from most electronics stores.

If you intend to mount the Monitor set to a wall, attach Wall mounting interface (optional parts) to the back of the set.

When you install the Monitor set using the wall mounting interface (optional parts), attach it carefully so it will not drop.

Please use VESA standard as below. yy784.8 mm (30.9 inch) and under

*Wall Mount Pad Thickness : 2.6 mm

*Screw : Φ 4.0 mm x Pitch 0.7 mm x Length 10 mm

yy787.4 mm (31.0 inch) and above

*Please use VESA standard wall mount pad and screws.