LG Electronics M2450D, M2250D Troubleshooting When Using 3D Mode, Cannot see 3D image properly

ENGLISH

84TROUBLESHOOTING WHEN USING 3D MODE

TROUBLESHOOTING WHEN USING 3D MODE

I can see a swirling oil-like pattern on the Monitor set when the Monitor set is turned off.

This is caused by the interference of external light in the air layer between the LCD surface and 3D filter. The pattern becomes almost invisible when you turn on the power again.

I cannot see 3D image properly

Problem	Resolution
If you are not using the glasses	When you view 3D images with this monitor, it is very important that you use
provided with the monitor.	the glasses provided with the monitor. The glasses are designed to compensate
	optically for the 3D filter attached to the surface of the monitor. If you wear third-
	party glasses, you may not see 3D images properly on the monitor.
If you view 3D images outside the	The optimal viewing angle of this monitor is between 12° degrees; the optimal
optimal viewing angle or distance.	viewing distance is between 50 cm to 90 cm from the monitor. When you view 3D
	images outside the optimal viewing angle or viewing distance, the images may
	look overlapped or not be displayed properly in 3D.

Notes for Viewing 3D Image with 3D Digital Brodcating

*In Analogue Brodcating, 3D Imaging does not work.

Problem	Resolution
When switching the 2D image	yy Disable the 3D imaging mode with the 3D button.
display to the 3D image display	yy The 3D imaging mode is disabled automatically if you change the channel.
with the 3D button on the remote
control, the overlapped image may
be displayed.
If the screen is divided into left/right	This channel supports the 3D imaging mode. Select the 3D imaging type
or top/bottom when you change the	displayed on the screen by pressing the 3D button on the remote control.
channel

If your eyes are sore or the screen	Select Left/Right or Right/Left option, which you find better for viewing 3D
looks blurry while viewing 3D	images.
images.