LG Electronics 60PCLD owner manual Setup menu

Reference

-Use this function to specify a TV ID number.

-Refer to 'Real Data Mapping'. See page 55.

1.Press the MENU button and then use A / _' button to select the

SETUP menu.

2.Press the D,,button and then use A r _" button to select Set ID.

3.Press the I_, button and then use A r T button to adjust Set ID to

choose the desired TV ID number. The adjustment range of Set is 1 ~ 99.

4.Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.

•Baud rate : 9600 bps (UART)

•Data length : 8 bits

•Parity : None

•Stop bit : 1 bit

•Communication code : ASCII code

* Use a crossed (reverse) cable.

		COMMAND 1 COMMAND 2			DATA
					(Hexadecimal)
01.	Power		k	a	0	~ 1
02.	Input Select		k	b	* (Refer		to p.55)
03.	Aspect Ratio		k	c	* (Refer		to p.55)
04.	Screen	Mute	k	d	0	~ 1
05.	Volume	Mute	k	e	0	~ 1
06.	Volume	Control	k	f	0	~ 64
07.	Contrast		k	,cj	0	-	64
08.	Brightness		k	h	0	-	64
09.	Color		k	i	0	-	64
10.	Tint		k	j	0	-	64
11.	Sharpness		k	k	0	-	64
12.	OSD Select		k	I	0	~ 1
13.	Remote Control Lock Mode		k	m	0	~ 1
14.	Treble		k	r	0	~ 64
15.	Bass		k	s	0	~ 64
16.	Balance		k	t	0	~ 64
			k	u	0-3

Transmission

[C_ommand2][ ][Set ID][ ][Data][Cr]

*[Command 1]: First command to control the set.(j,k,m or x)

*[Command 2]: Second command to control the set.

*[Set ID]: You can adjust the set ID to choose desired monitor ID number in Setup menu. Adjustment range is 1

~99. When selecting Set ID '0',every connected the TV is controlled. Set ID is indicated as decimal

(1~99) on menu and as Hexa decimal (0x0~0x63) on transmission/receiving protocol.

* [DATA]: To transmit command data.

Transmit 'FF'data to read status of command.

*[Cr]: Carriage Return ASCII code '0xOD'

*[ ]: ASCII code 'space (0x20)'

OK Acknowledgement

[C_ ][Set IU][ ][OK][Bata][x]

*The Monitor transmits ACK (acknowledgement) based on this format when receiving normal data. At this time, if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the data of the PC computer.

Error Acknowledgement

[C_[ ][Set IB][ ][NG][Data][x]

*The Monitor transmits ACK (acknowledgement) based on this format when receiving abnormal data from non-viable functions or communication errors.

Data 1: Illegal Code

2:Not supported function

3:Wait more time

			COM-	COM-	DATA 0		DATA 1	DATA 2	DATA 3	DATA 4	DATA 5
			MAND 1	MAND 2	(Hexadecimal)		(Hexadecimal)	(Hexadecimal) (Hexadecimal) (Hexadecimal)			(Hexadecimal)
20.	Channel	Tuning	m	a	physical/program	high	major/program low	major low	minor high	minor low	attribute
21.	Channel	Add/Del	m	b	00 ~ 01
22.	Key		m	c	key code
23.	Input Select		x	b	*(Refer	to p.58)

54