LG Electronics 60PCLD owner manual Power Command2a, Aspect Ratio Command2c Main picture format

01.Power (Command2:a)

_1_To control Power On/Off of the TV.

Transmission

i[k][a][	][Set IU][	][Uata][Cr]	i
Data	0 : Power	Off	1 : Power On
Acknowledgement
i[a][	][Set IU][ ][OK][Uata][x]		]

*In a like manner, if other functions transmit 'PP'data

based on this format, Acknowledgement data feedback presents status about each function.

02. Input Select (Command2:b) (Main Picture Input)

II_ To select input source for the TV.

Transmission		]
[[k][b][	][Set ID][ ][Data][Cr]
Data	0: DTV	5: Component 2
	1: Analog	7: RGB-PC
	2:AV1	8: HDMI1/DVI
	3:AV2	9:HDMI2

4:Component 1

I[b][ ][Set ID][ ][OK][Data][x]

Acknowledgement

03.Aspect Ratio (Command2:c) (Main picture format)

To adjust the screen format.

You can also adjust the screen format using the RATIO button on remote control or in the Option menu.

Transmission

I[k][c][	][Set ID][ ][Data][Cr]	1
Date	1:4:3	4: Zoom	1
	2:16:9	5: Zoom	2
	3: Horizon	6: Set by program
Acknowledgement
I[c][ ][Set IU][ ][OK][Uata][x]		1

04.Screen Mute (Command2:d)

_1_To select screen mute on/off.

Transmission

i[k][d][ ][Set IU][ ][Uata][Cr]i

Data 0 : Screen mute off (Picture on) 1 : Screen mute on (Picture off)

Acknowledgement
I[d][ ][Set IU][ ][OK][Uata][x]	1

Reference

05. Volume Mute (Command2:e)

To control volume mute on/off.

You can also adjust mute using the MUTE button on remote control.

Transmission
[[k][e][ ][Set IU][ ][Data][Cr]						]
Data	0	: Volume		mute	on (Volume	off)
	1	: Volume		mute	off (Volume	on)
Acknowledgement
i[e][	][Set	ID][	][OK][Uata][x]			I
06.	Volume		Control		(Command2:f)

II_ To adjust volume.
	You can also adjust volume with the volume buttons
	on	remote	control.
Transmission
i[k][f][		][Set Ia][		][Data][Cr]	i
Data		Min:0~		Max:64
		• Refer to 'Realdata mapping' as shown below.
Acknowledgement
[[f][	][Set ID][		][OK][Uata][x]		i
07.	Contrast			(Command2:g)
	To	adjust	screen contrast.
	You can also adjust contrast in the Video menu.
Transmission
i[k][g][		][Set	IU][ ][Uata][Cr]		i
Data		Min:0~		Max:64
		• Refer to 'Realdata mapping' as shown below.
Acknowledgement
[[g][	][Set IU][			][OK][Uata][x]	]

08. Brightness (Command2:h)

II_ To adjust screen brightness.

You can also adjust brightness in the Video menu. Transmission

I[k][h][	][Set Ia][	][aata][Cr]	I
Data	Min:0~	Max:64

•Refer to 'Realdata mapping' as shown below. Acknowledgement

i[h][ ][Set IU][ ][OK][Data][x] i

55